LambdaMOO+Stunt Programmer’s Manual

For LambdaMOO+Stunt Version 10-wip

January 2014

by Pavel Curtis

a.k.a. Haakon

a.k.a. Lambda

Copyright © 1991, 1992, 1993, 1995, 1996 by Pavel Curtis.
Copyright © 1997 by Erik Ostrom.
Copyright © 2004 by Roger F. Crew.
Copyright © 2011, 2012, 2013, 2014 by Todd Sundsted.

Copies of the electronic source for this document can be obtained using anonymous FTP on the Internet. At the site ftp.lambda.moo.mud.org the files are pub/MOO/ProgrammersManual.*; several different file formats are provided, including HTML, Texinfo, plain text, and PostScript.

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the author.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

1 Introduction

LambdaMOO is a network-accessible, multi-user, programmable, interactive system well-suited to the construction of text-based adventure games, conferencing systems, and other collaborative software. Its most common use, however, is as a multi-participant, low-bandwidth virtual reality, and it is with this focus in mind that I describe it here.

Participants (usually referred to as players) connect to LambdaMOO using Telnet or some other, more specialized, client program. Upon connection, they are usually presented with a welcome message explaining how to either create a new character or connect to an existing one. Characters are the embodiment of players in the virtual reality that is LambdaMOO.

Having connected to a character, players then give one-line commands that are parsed and interpreted by LambdaMOO as appropriate. Such commands may cause changes in the virtual reality, such as the location of a character, or may simply report on the current state of that reality, such as the appearance of some object.

The job of interpreting those commands is shared between the two major components in the LambdaMOO system: the server and the database. The server is a program, written in a standard programming language, that manages the network connections, maintains queues of commands and other tasks to be executed, controls all access to the database, and executes other programs written in the MOO programming language. The database contains representations of all the objects in the virtual reality, including the MOO programs that the server executes to give those objects their specific behaviors.

Almost every command is parsed by the server into a call on a MOO procedure, or verb, that actually does the work. Thus, programming in the MOO language is a central part of making non-trivial extensions to the database and thus, the virtual reality.

In the next chapter, I describe the structure and contents of a LambdaMOO database. The following chapter gives a complete description of how the server performs its primary duty: parsing the commands typed by players. Next, I describe the complete syntax and semantics of the MOO programming language. Finally, I describe all of the database conventions assumed by the server.

Note: This manual describes only those aspects of LambdaMOO that are entirely independent of the contents of the database. It does not describe, for example, the commands or programming interfaces present in the LambdaCore database.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2 The LambdaMOO Database

In this chapter, I begin by describing in detail the various kinds of data that can appear in a LambdaMOO database and that, therefore, MOO programs can manipulate. In a few places, I refer to the LambdaCore database. This is one particular LambdaMOO database, created every so often by extracting the “core” of the current database for the original LambdaMOO.

Note: The original LambdaMOO resides on the host lambda.moo.mud.org on port 8888. Feel free to drop by! A copy of the most recent release of the LambdaCore database can be obtained by anonymous FTP from host ftp.lambda.moo.mud.org in the directory pub/MOO.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.1 MOO Value Types

There are a few kinds of values that MOO programs can manipulate:

Objects are the backbone of the MOO database and, as such, deserve a great deal of discussion; the entire next section is devoted to them. For now, let it suffice to say that there are two kinds of objects, anonymous objects and permanent objects. Anonymous objects are typically transient and are garbage collected when they are no longer needed. Permanent objects, as their name implies, are typically longed lived. Every permanent object is assigned a unique object number and must be accessed via that object number. The lifecycle of a permanent object is explicitly managed by the programmer.

A reference to an anonymous object is returned when the anonymous object is created with create(). References can be shared but they cannot be forged. That is, there is no literal representation of a reference to an anonymous object (that’s why they are anonymous).

The object number of a permanent object is also returned when the permanent object is created with create(). However, there is a literal representation of an object number. In programs, we write a reference to a particular permanent object by putting a hash mark (‘#’) followed by the number, like this:

#495

Object numbers are always integers.

An object number may or may not refer to an actual, live permanent object. If it does, we say that the object number is valid. If it does not, we say that the object number is invalid.

There are three special object numbers used for a variety of purposes: #-1, #-2, and #-3, usually referred to in the LambdaCore database as $nothing, $ambiguous_match, and $failed_match, respectively.

MOO supports the integers from -2^31 (that is, negative two to the power of 31) up to 2^31 - 1 (one less than two to the power of 31); that’s from -2147483648 to 2147483647, enough for most purposes. In MOO programs, integers are written just as you see them here, an optional minus sign followed by a non-empty sequence of decimal digits. In particular, you may not put commas, periods, or spaces in the middle of large integers, as we sometimes do in English and other natural languages (e.g., ‘2,147,483,647’).

Real numbers in MOO are represented as they are in almost all other programming languages, using so-called floating-point numbers. These have certain (large) limits on size and precision that make them useful for a wide range of applications. Floating-point numbers are written with an optional minus sign followed by a non-empty sequence of digits punctuated at some point with a decimal point (‘.’) and/or followed by a scientific-notation marker (the letter ‘E’ or ‘e’ followed by an optional sign and one or more digits). Here are some examples of floating-point numbers:

325.0   325.   3.25e2   0.325E3   325.E1   .0325e+4   32500e-2

All of these examples mean the same number. The third of these, as an example of scientific notation, should be read “3.25 times 10 to the power of 2”.

Fine points: The MOO represents floating-point numbers using the local meaning of the C-language double type, which is almost always equivalent to IEEE 754 double precision floating point. If so, then the smallest positive floating-point number is no larger than 2.2250738585072014e-308 and the largest floating-point number is 1.7976931348623157e+308.

IEEE infinities and NaN values are not allowed in MOO. The error E_FLOAT is raised whenever an infinity would otherwise be computed; E_INVARG is raised whenever a NaN would otherwise arise. The value 0.0 is always returned on underflow.

Character strings are arbitrarily-long sequences of normal, ASCII printing characters. When written as values in a program, strings are enclosed in double-quotes, like this:

"This is a character string."

To include a double-quote in the string, precede it with a backslash (‘\’), like this:

"His name was \"Leroy\", but nobody ever called him that."

Finally, to include a backslash in a string, double it:

"Some people use backslash ('\\') to mean set difference."

MOO strings may not include special ASCII characters like carriage-return, line-feed, bell, etc. The only non-printing characters allowed are spaces and tabs.

Fine point: There is a special kind of string used for representing the arbitrary bytes used in general, binary input and output. In a binary string, any byte that isn’t an ASCII printing character or the space character is represented as the three-character substring "~XX", where XX is the hexadecimal representation of the byte; the input character ‘~’ is represented by the three-character substring "~7E". This special representation is used by the functions encode_binary() and decode_binary() and by the functions notify() and read() with network connections that are in binary mode. See the descriptions of the set_connection_option(), encode_binary(), and decode_binary() functions for more details.

Errors are, by far, the least frequently used values in MOO. In the normal case, when a program attempts an operation that is erroneous for some reason (for example, trying to add a number to a character string), the server stops running the program and prints out an error message. However, it is possible for a program to stipulate that such errors should not stop execution; instead, the server should just let the value of the operation be an error value. The program can then test for such a result and take some appropriate kind of recovery action. In programs, error values are written as words beginning with ‘E_’. The complete list of error values, along with their associated messages, is as follows:

E_NONE      No error
E_TYPE      Type mismatch
E_DIV       Division by zero
E_PERM      Permission denied
E_PROPNF    Property not found
E_VERBNF    Verb not found
E_VARNF     Variable not found
E_INVIND    Invalid indirection
E_RECMOVE   Recursive move
E_MAXREC    Too many verb calls
E_RANGE     Range error
E_ARGS      Incorrect number of arguments
E_NACC      Move refused by destination
E_INVARG    Invalid argument
E_QUOTA     Resource limit exceeded
E_FLOAT     Floating-point arithmetic error
E_FILE      File error
E_EXEC      Exec error
E_INTRPT    Interrupted

MOO supports two kinds of collections. Collections hold zero or more related MOO values, including other collections.

The first kind of collection in MOO programs is a list. A list is a sequence of arbitrary MOO values, possibly including other lists. In programs, lists are written in mathematical set notation with each of the elements written out in order, separated by commas, the whole enclosed in curly braces (‘{’ and ‘}’). For example, a list of the names of the days of the week is written like this:

{"Sunday", "Monday", "Tuesday", "Wednesday",
 "Thursday", "Friday", "Saturday"}

Note that it doesn’t matter that we put a line-break in the middle of the list. This is true in general in MOO: anywhere that a space can go, a line-break can go, with the same meaning. The only exception is inside character strings, where line-breaks are not allowed.

The other kind of collection is a map. A map, which is sometimes called a “dictionary”, implements an ordered associative relationship between pairs of MOO values. The first value in the pair is typically called the “key” and the second value is typically called the “value”. The value can hold any MOO value, including lists and other maps. The key can hold any non-collection value (that is, it cannot hold a list or map) and each key in a map must be unique. In programs, maps are written as a sequence of key/value pairs, separated by commas, enclosed in brackets (‘[’ and ‘]’). In each pair, the key and value are separated by an arrow (‘->’). A map of names to ages is written like this:

["Bob" -> 23, "Sally" -> 13, "Dave" -> 19,
 "Peter" -> 27, "Karen" -> 27]

Note that while the keys must be unique, the values are not required to be so.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.2 Objects in the MOO Database

Objects are, in a sense, the whole point of the MOO programming language.

Objects encapsulate state and behavior – as they do in other object-oriented programming languages. Permanent objects are also used to represent objects in the virtual reality, like people, rooms, exits, and other concrete things. Because of this, MOO makes a bigger deal out of creating objects than it does for other kinds of values, like integers.

Numbers always exist, in a sense; you have only to write them down in order to operate on them. With objects, it is different. The permanent object with number ‘#958’ does not exist just because you write down its number. An explicit operation, the ‘create()’ function described later, is required to bring an object into existence. Symmetrically, once created, objects continue to exist until there are no more references to them (for anonymous objects) or they are explicitly destroyed by the ‘recycle()’ function (for both anonymous and permanent objects).

The identifying number associated with a permanent object is unique to that object. It was assigned when the object was created and will never be reused, even if the object is destroyed. Thus, if we create an object and it is assigned the number ‘#1076’, the next object to be created will be assigned ‘#1077’, even if ‘#1076’ is destroyed in the meantime.

Both anonymous and permanent objects are made up of three kinds of pieces that together define their behavior: attributes, properties, and verbs.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.2.1 Fundamental Object Attributes

There are three fundamental attributes to every object:

  1. A flag (either true or false) specifying whether or not the object represents a player,
  2. A list of object that are its parents, and
  3. A list of the objects that are its children; that is, those objects for which this object is one of their parents.

The act of creating a character sets the player attribute of an object and only a wizard (using the function set_player_flag()) can change that setting. Only characters have the player bit set to 1. Currently, only permanent objects can be players.

The parent/child relationship is used for sharing behavior among objects. For example, the LambdaCore database contains an object representing a sort of “generic” room. All other rooms are descendants (i.e., children or children’s children, or …) of that one. The generic room defines those pieces of behavior that are common to all rooms; other rooms specialize that behavior for their own purposes. The notion of objects and specialization is the very essence of what is meant by object-oriented programming. Only the functions create(), recycle(), chparents(), and renumber() can change the parents and children attributes.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.2.2 Properties on Objects

A property is a named “slot” in an object that can hold an arbitrary MOO value. Every object has nine built-in properties whose values are constrained to be of particular types. In addition, an object can have any number of other properties, none of which have type constraints. The built-in properties are as follows:

name         a string, the usual name for this object
owner        an object, the player who controls access to it
location     an object, where the object is in virtual reality
contents     a list of objects, the inverse of ‘location
programmer   a bit, does the object have programmer rights?
wizard       a bit, does the object have wizard rights?
r            a bit, is the object publicly readable?
w            a bit, is the object publicly writable?
f            a bit, is the object fertile?
a            a bit, can this be a parent of anonymous objects?

The ‘name’ property is used to identify the object in various printed messages. It can only be set by a wizard or by the owner of the object. For player objects, the ‘name’ property can only be set by a wizard; this allows the wizards, for example, to check that no two players have the same name.

The ‘owner’ identifies the object that has owner rights to this object, allowing them, for example, to change the ‘name’ property. Only a wizard can change the value of this property.

The ‘location’ and ‘contents’ properties describe a hierarchy of object containment in the virtual reality. Most objects are located “inside” some other object and that other object is the value of the ‘location’ property. The ‘contents’ property is a list of those objects for which this object is their location. In order to maintain the consistency of these properties, only the move() function is able to change them.

The ‘wizard’ and ‘programmer’ bits are only applicable to characters, objects representing players. They control permission to use certain facilities in the server. They may only be set by a wizard.

The ‘r’ bit controls whether or not players other than the owner of this object can obtain a list of the properties or verbs in the object. Symmetrically, the ‘w’ bit controls whether or not non-owners can add or delete properties and/or verbs on this object. The ‘r’ and ‘w’ bits can only be set by a wizard or by the owner of the object.

The ‘f’ bit specifies whether or not this object is fertile, whether or not players other than the owner of this object can create new objects with this one as a parent. It also controls whether or not non-owners can use the chparents() built-in function to make this object a parent of an existing object. The ‘f’ bit can only be set by a wizard or by the owner of the object.

The ‘a’ bit specifies whether or not this object can be used as a parent of an anonymous object created by a player other than the owner of this object. It works similarly to the ‘f’ bit, but governs the creation of anonymous objects only.

All of the built-in properties on any object can, by default, be read by any player. It is possible, however, to override this behavior from within the database, making any of these properties readable only by wizards. See the chapter on server assumptions about the database for details.

As mentioned above, it is possible, and very useful, for objects to have other properties aside from the built-in ones. These can come from two sources.

First, an object has a property corresponding to every property in its parent objects. To use the jargon of object-oriented programming, this is a kind of inheritance. If some object has a property named ‘foo’, then so will all of its children and thus its children’s children, and so on.

Second, an object may have a new property defined only on itself and its descendants. For example, an object representing a rock might have properties indicating its weight, chemical composition, and/or pointiness, depending upon the uses to which the rock was to be put in the virtual reality.

Every defined property (as opposed to those that are built-in) has an owner and a set of permissions for non-owners. The owner of the property can get and set the property’s value and can change the non-owner permissions. Only a wizard can change the owner of a property.

The initial owner of a property is the player who added it; this is usually, but not always, the player who owns the object to which the property was added. This is because properties can only be added by the object owner or a wizard, unless the object is publicly writable (i.e., its ‘w’ property is 1), which is rare. Thus, the owner of an object may not necessarily be the owner of every (or even any) property on that object.

The permissions on properties are drawn from this set: ‘r’ (read), ‘w’ (write), and ‘c’ (change ownership in descendants). Read permission lets non-owners get the value of the property and, of course, write permission lets them set that value. The ‘c’ permission bit is a little more complicated.

Recall that every object has all of the properties that its parents do and perhaps some more. Ordinarily, when a child object inherits a property from its parents, the owner of the child becomes the owner of that property. This is because the ‘c’ permission bit is “on” by default. If the ‘c’ bit is not on, then the inherited property has the same owner in the child as it does in the parent.

As an example of where this can be useful, the LambdaCore database ensures that every player has a ‘password’ property containing the encrypted version of the player’s connection password. For security reasons, we don’t want other players to be able to see even the encrypted version of the password, so we turn off the ‘r’ permission bit. To ensure that the password is only set in a consistent way (i.e., to the encrypted version of a player’s password), we don’t want to let anyone but a wizard change the property. Thus, in the parent object for all players, we made a wizard the owner of the password property and set the permissions to the empty string, "". That is, non-owners cannot read or write the property and, because the ‘c’ bit is not set, the wizard who owns the property on the parent class also owns it on all of the descendants of that class.

Another, perhaps more down-to-earth example arose when a character named Ford started building objects he called “radios” and another character, yduJ, wanted to own one. Ford kindly made the generic radio object fertile, allowing yduJ to create a child object of it, her own radio. Radios had a property called ‘channel’ that identified something corresponding to the frequency to which the radio was tuned. Ford had written nice programs on radios (verbs, discussed below) for turning the channel selector on the front of the radio, which would make a corresponding change in the value of the ‘channel’ property. However, whenever anyone tried to turn the channel selector on yduJ’s radio, they got a permissions error. The problem concerned the ownership of the ‘channel’ property.

As I explain later, programs run with the permissions of their author. So, in this case, Ford’s nice verb for setting the channel ran with his permissions. But, since the ‘channel’ property in the generic radio had the ‘c’ permission bit set, the ‘channel’ property on yduJ’s radio was owned by her. Ford didn’t have permission to change it! The fix was simple. Ford changed the permissions on the ‘channel’ property of the generic radio to be just ‘r’, without the ‘c’ bit, and yduJ made a new radio. This time, when yduJ’s radio inherited the ‘channel’ property, yduJ did not inherit ownership of it; Ford remained the owner. Now the radio worked properly, because Ford’s verb had permission to change the channel.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.2.3 Verbs on Objects

The final kind of piece making up an object is verbs. A verb is a named MOO program that is associated with a particular object. Most verbs implement commands that a player might type; for example, in the LambdaCore database, there is a verb on all objects representing containers that implements commands of the form ‘put object in container’. It is also possible for MOO programs to invoke the verbs defined on objects. Some verbs, in fact, are designed to be used only from inside MOO code; they do not correspond to any particular player command at all. Thus, verbs in MOO are like the ‘procedures’ or ‘methods’ found in some other programming languages.

As with properties, every verb has an owner and a set of permission bits. The owner of a verb can change its program, its permission bits, and its argument specifiers (discussed below). Only a wizard can change the owner of a verb. The owner of a verb also determines the permissions with which that verb runs; that is, the program in a verb can do whatever operations the owner of that verb is allowed to do and no others. Thus, for example, a verb owned by a wizard must be written very carefully, since wizards are allowed to do just about anything.

The permission bits on verbs are drawn from this set: ‘r’ (read), ‘w’ (write), ‘x’ (execute), and ‘d’ (debug). Read permission lets non-owners see the program for a verb and, symmetrically, write permission lets them change that program. The other two bits are not, properly speaking, permission bits at all; they have a universal effect, covering both the owner and non-owners.

The execute bit determines whether or not the verb can be invoked from within a MOO program (as opposed to from the command line, like the ‘put’ verb on containers). If the ‘x’ bit is not set, the verb cannot be called from inside a program. The ‘x’ bit is usually set.

The setting of the debug bit determines what happens when the verb’s program does something erroneous, like subtracting a number from a character string. If the ‘d’ bit is set, then the server raises an error value; such raised errors can be caught by certain other pieces of MOO code. If the error is not caught, however, the server aborts execution of the command and, by default, prints an error message on the terminal of the player whose command is being executed. (See the chapter on server assumptions about the database for details on how uncaught errors are handled.) If the ‘d’ bit is not set, then no error is raised, no message is printed, and the command is not aborted; instead the error value is returned as the result of the erroneous operation.

Note: The ‘d’ bit exists only for historical reasons; it used to be the only way for MOO code to catch and handle errors. With the introduction of the try-except statement and the error-catching expression, the ‘d’ bit is no longer useful. All new verbs should have the ‘d’ bit set, using the newer facilities for error handling if desired. Over time, old verbs written assuming the ‘d’ bit would not be set should be changed to use the new facilities instead.

In addition to an owner and some permission bits, every verb has three ‘argument specifiers’, one each for the direct object, the preposition, and the indirect object. The direct and indirect specifiers are each drawn from this set: ‘this’, ‘any’, or ‘none’. The preposition specifier is ‘none’, ‘any’, or one of the items in this list:

with/using
at/to
in front of
in/inside/into
on top of/on/onto/upon
out of/from inside/from
over
through
under/underneath/beneath
behind
beside
for/about
is
as
off/off of

The argument specifiers are used in the process of parsing commands, described in the next chapter.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3 The Built-in Command Parser

The MOO server is able to do a small amount of parsing on the commands that a player enters. In particular, it can break apart commands that follow one of the following forms:

verb
verb direct-object
verb direct-object preposition indirect-object

Real examples of these forms, meaningful in the LambdaCore database, are as follows:

look
take yellow bird
put yellow bird in cuckoo clock

Note that English articles (i.e., ‘the’, ‘a’, and ‘an’) are not generally used in MOO commands; the parser does not know that they are not important parts of objects’ names.

To have any of this make real sense, it is important to understand precisely how the server decides what to do when a player types a command.

But first, we mention the three situations in which a line typed by a player is not treated as an ordinary command:

  1. The line may exactly match the connection’s defined flush command, if any (‘.flush’ by default), in which case all pending lines of input are cleared and nothing further is done with the flush command itself. Likewise, any line may be flushed by a subsequent flush command before the server otherwise gets a chance to process it. For more on this, see Flushing Unprocessed Input.
  2. The line may begin with a prefix that qualifies it for out-of-band processing and thence, perhaps, as an out-of-band command. For more on this, see Out-of-band Processing.
  3. The connection may be subject to a read() call (see section Operations on Network Connections) or there may be a .program command in progress (see section The .program Command), either of which will consume the line accordingly. Also note that if connection option "hold-input" has been set, all in-band lines typed by the player are held at this point for future reading, even if no reading task is currently active.

Otherwise, we (finally) have an actual command line that can undergo normal command parsing as follows:

The server checks whether or not the first non-blank character in the command is one of the following:

"        :        ;

If so, that character is replaced by the corresponding command below, followed by a space:

say      emote    eval

For example, the command

"Hi, there.

is treated exactly as if it were as follows:

say Hi, there.

The server next breaks up the command into words. In the simplest case, the command is broken into words at every run of space characters; for example, the command ‘foo bar baz’ would be broken into the words ‘foo’, ‘bar’, and ‘baz’. To force the server to include spaces in a “word”, all or part of a word can be enclosed in double-quotes. For example, the command

foo "bar mumble" baz" "fr"otz" bl"o"rt

is broken into the words ‘foo’, ‘bar mumble’, ‘baz frotz’, and ‘blort’. Finally, to include a double-quote or a backslash in a word, they can be preceded by a backslash, just like in MOO strings.

Having thus broken the string into words, the server next checks to see if the first word names any of the five “intrinsic” commands: ‘.program’, ‘PREFIX’, ‘OUTPUTPREFIX’, ‘SUFFIX’, ‘OUTPUTSUFFIX’. The first one of these is only available to programmers, the other four are intended for use by client programs; all five are described in the final chapter of this document, Server Commands and Database Assumptions. If the first word isn’t one of the above, then we get to the usual case: a normal MOO command.

The server next gives code in the database a chance to handle the command. If the verb $do_command() exists, it is called with the words of the command passed as its arguments and argstr set to the raw command typed by the user. If $do_command() does not exist, or if that verb-call completes normally (i.e., without suspending or aborting) and returns a false value, then the built-in command parser is invoked to handle the command as described below. Otherwise, it is assumed that the database code handled the command completely and no further action is taken by the server for that command.

If the built-in command parser is invoked, the server tries to parse the command into a verb, direct object, preposition and indirect object. The first word is taken to be the verb. The server then tries to find one of the prepositional phrases listed at the end of the previous section, using the match that occurs earliest in the command. For example, in the very odd command ‘foo as bar to baz’, the server would take ‘as’ as the preposition, not ‘to’.

If the server succeeds in finding a preposition, it considers the words between the verb and the preposition to be the direct object and those after the preposition to be the indirect object. In both cases, the sequence of words is turned into a string by putting one space between each pair of words. Thus, in the odd command from the previous paragraph, there are no words in the direct object (i.e., it is considered to be the empty string, "") and the indirect object is "bar to baz".

If there was no preposition, then the direct object is taken to be all of the words after the verb and the indirect object is the empty string.

The next step is to try to find MOO objects that are named by the direct and indirect object strings.

First, if an object string is empty, then the corresponding object is the special object #-1 (aka $nothing in LambdaCore). If an object string has the form of an object number (i.e., a hash mark (‘#’) followed by digits), and the object with that number exists, then that is the named object. If the object string is either "me" or "here", then the player object itself or its location is used, respectively.

Otherwise, the server considers all of the objects whose location is either the player (i.e., the objects the player is “holding”, so to speak) or the room the player is in (i.e., the objects in the same room as the player); it will try to match the object string against the various names for these objects.

The matching done by the server uses the ‘aliases’ property of each of the objects it considers. The value of this property should be a list of strings, the various alternatives for naming the object. If it is not a list, or the object does not have an ‘aliases’ property, then the empty list is used. In any case, the value of the ‘name’ property is added to the list for the purposes of matching.

The server checks to see if the object string in the command is either exactly equal to or a prefix of any alias; if there are any exact matches, the prefix matches are ignored. If exactly one of the objects being considered has a matching alias, that object is used. If more than one has a match, then the special object #-2 (aka $ambiguous_match in LambdaCore) is used. If there are no matches, then the special object #-3 (aka $failed_match in LambdaCore) is used.

So, now the server has identified a verb string, a preposition string, and direct- and indirect-object strings and objects. It then looks at each of the verbs defined on each of the following four objects, in order:

  1. the player who typed the command,
  2. the room the player is in,
  3. the direct object, if any, and
  4. the indirect object, if any.

For each of these verbs in turn, it tests if all of the the following are true:

I’ll explain each of these criteria in turn.

Every verb has one or more names; all of the names are kept in a single string, separated by spaces. In the simplest case, a verb-name is just a word made up of any characters other than spaces and stars (i.e., ‘ ’ and ‘*’). In this case, the verb-name matches only itself; that is, the name must be matched exactly.

If the name contains a single star, however, then the name matches any prefix of itself that is at least as long as the part before the star. For example, the verb-name ‘foo*bar’ matches any of the strings ‘foo’, ‘foob’, ‘fooba’, or ‘foobar’; note that the star itself is not considered part of the name.

If the verb name ends in a star, then it matches any string that begins with the part before the star. For example, the verb-name ‘foo*’ matches any of the strings ‘foo’, ‘foobar’, ‘food’, or ‘foogleman’, among many others. As a special case, if the verb-name is ‘*’ (i.e., a single star all by itself), then it matches anything at all.

Recall that the argument specifiers for the direct and indirect objects are drawn from the set ‘none’, ‘any’, and ‘this’. If the specifier is ‘none’, then the corresponding object value must be #-1 (aka $nothing in LambdaCore); that is, it must not have been specified. If the specifier is ‘any’, then the corresponding object value may be anything at all. Finally, if the specifier is ‘this’, then the corresponding object value must be the same as the object on which we found this verb; for example, if we are considering verbs on the player, then the object value must be the player object.

Finally, recall that the argument specifier for the preposition is either ‘none’, ‘any’, or one of several sets of prepositional phrases, given above. A specifier of ‘none’ matches only if there was no preposition found in the command. A specifier of ‘any’ always matches, regardless of what preposition was found, if any. If the specifier is a set of prepositional phrases, then the one found must be in that set for the specifier to match.

So, the server considers several objects in turn, checking each of their verbs in turn, looking for the first one that meets all of the criteria just explained. If it finds one, then that is the verb whose program will be executed for this command. If not, then it looks for a verb named ‘huh’ on the room that the player is in; if one is found, then that verb will be called. This feature is useful for implementing room-specific command parsing or error recovery. If the server can’t even find a ‘huh’ verb to run, it prints an error message like ‘I couldn't understand that.’ and the command is considered complete.

At long last, we have a program to run in response to the command typed by the player. When the code for the program begins execution, the following built-in variables will have the indicated values:

player    an object, the player who typed the command
this      an object, the object on which this verb was found
caller    an object, the same as ‘player
verb      a string, the first word of the command
argstr    a string, everything after the first word of the command
args      a list of strings, the words in ‘argstr
dobjstr   a string, the direct object string found during parsing
dobj      an object, the direct object value found during matching
prepstr   a string, the prepositional phrase found during parsing
iobjstr   a string, the indirect object string
iobj      an object, the indirect object value

The value returned by the program, if any, is ignored by the server.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4 The MOO Programming Language

MOO stands for “MUD, Object Oriented.” MUD, in turn, has been said to stand for many different things, but I tend to think of it as “Multi-User Dungeon” in the spirit of those ancient precursors to MUDs, Adventure and Zork.

MOO, the programming language, is a relatively small and simple object-oriented language designed to be easy to learn for most non-programmers; most complex systems still require some significant programming ability to accomplish, however.

Having given you enough context to allow you to understand exactly what MOO code is doing, I now explain what MOO code looks like and what it means. I begin with the syntax and semantics of expressions, those pieces of code that have values. After that, I cover statements, the next level of structure up from expressions. Next, I discuss the concept of a task, the kind of running process initiated by players entering commands, among other causes. Finally, I list all of the built-in functions available to MOO code and describe what they do.

First, though, let me mention comments. You can include bits of text in your MOO program that are ignored by the server. The idea is to allow you to put in notes to yourself and others about what the code is doing. To do this, begin the text of the comment with the two characters ‘/*’ and end it with the two characters ‘*/’; this is just like comments in the C programming language. Note that the server will completely ignore that text; it will not be saved in the database. Thus, such comments are only useful in files of code that you maintain outside the database.

To include a more persistent comment in your code, try using a character string literal as a statement. For example, the sentence about peanut butter in the following code is essentially ignored during execution but will be maintained in the database:

for x in (players())
  "Grendel eats peanut butter!";
  player:tell(x.name, " (", x, ")");
endfor

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1 MOO Language Expressions

Expressions are those pieces of MOO code that generate values; for example, the MOO code

3 + 4

is an expression that generates (or “has” or “returns”) the value 7. There are many kinds of expressions in MOO, all of them discussed below.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.1 Errors While Evaluating Expressions

Most kinds of expressions can, under some circumstances, cause an error to be generated. For example, the expression x / y will generate the error E_DIV if y is equal to zero. When an expression generates an error, the behavior of the server is controlled by setting of the ‘d’ (debug) bit on the verb containing that expression. If the ‘d’ bit is not set, then the error is effectively squelched immediately upon generation; the error value is simply returned as the value of the expression that generated it.

Note: This error-squelching behavior is very error prone, since it affects all errors, including ones the programmer may not have anticipated. The ‘d’ bit exists only for historical reasons; it was once the only way for MOO programmers to catch and handle errors. The error-catching expression and the try-except statement, both described below, are far better ways of accomplishing the same thing.

If the ‘d’ bit is set, as it usually is, then the error is raised and can be caught and handled either by code surrounding the expression in question or by verbs higher up on the chain of calls leading to the current verb. If the error is not caught, then the server aborts the entire task and, by default, prints a message to the current player. See the descriptions of the error-catching expression and the try-except statement for the details of how errors can be caught, and the chapter on server assumptions about the database for details on the handling of uncaught errors.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.2 Writing Values Directly in Verbs

The simplest kind of expression is a literal MOO value, just as described in the section on values at the beginning of this document. For example, the following are all expressions:

17
#893
"This is a character string."
E_TYPE
{"This", "is", "a", "list", "of", "words"}

In the case of lists, like the last example above, note that the list expression contains other expressions, several character strings in this case. In general, those expressions can be of any kind at all, not necessarily literal values. For example,

{3 + 4, 3 - 4, 3 * 4}

is an expression whose value is the list {7, -1, 12}.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.3 Naming Values Within a Verb

As discussed earlier, it is possible to store values in properties on objects; the properties will keep those values forever, or until another value is explicitly put there. Quite often, though, it is useful to have a place to put a value for just a little while. MOO provides local variables for this purpose.

Variables are named places to hold values; you can get and set the value in a given variable as many times as you like. Variables are temporary, though; they only last while a particular verb is running; after it finishes, all of the variables given values there cease to exist and the values are forgotten.

Variables are also “local” to a particular verb; every verb has its own set of them. Thus, the variables set in one verb are not visible to the code of other verbs.

The name for a variable is made up entirely of letters, digits, and the underscore character (‘_’) and does not begin with a digit. The following are all valid variable names:

foo
_foo
this2that
M68000
two_words
This_is_a_very_long_multiword_variable_name

Note that, along with almost everything else in MOO, the case of the letters in variable names is insignificant. For example, these are all names for the same variable:

fubar
Fubar
FUBAR
fUbAr

A variable name is itself an expression; its value is the value of the named variable. When a verb begins, almost no variables have values yet; if you try to use the value of a variable that doesn’t have one, the error value E_VARNF is raised. (MOO is unlike many other programming languages in which one must ‘declare’ each variable before using it; MOO has no such declarations.) The following variables always have values:

INT         FLOAT       OBJ
STR         LIST        MAP
ERR         player      this
caller      verb        args
argstr      dobj        dobjstr
prepstr     iobj        iobjstr
NUM

The values of some of these variables always start out the same:

INT

an integer, the type code for integers (see the description of the function typeof(), below)

NUM

the same as INT (for historical reasons)

FLOAT

an integer, the type code for floating-point numbers

LIST

an integer, the type code for lists

MAP

an integer, the type code for maps

STR

an integer, the type code for strings

ANON

an integer, the type code for anonymous objects

OBJ

an integer, the type code for permanent objects

ERR

an integer, the type code for error values

For others, the general meaning of the value is consistent, though the value itself is different for different situations:

player

an object, the player who typed the command that started the task that involved running this piece of code.

this

an object, the object on which the currently-running verb was found.

caller

an object, the object on which the verb that called the currently-running verb was found. For the first verb called for a given command, ‘caller’ has the same value as ‘player’.

verb

a string, the name by which the currently-running verb was identified.

args

a list, the arguments given to this verb. For the first verb called for a given command, this is a list of strings, the words on the command line.

The rest of the so-called “built-in” variables are only really meaningful for the first verb called for a given command. Their semantics is given in the discussion of command parsing, above.

To change what value is stored in a variable, use an assignment expression:

variable = expression

For example, to change the variable named ‘x’ to have the value 17, you would write ‘x = 17’ as an expression. An assignment expression does two things:

Thus, the expression

13 + (x = 17)

changes the value of ‘x’ to be 17 and returns 30.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.4 Arithmetic Operators

All of the usual simple operations on numbers are available to MOO programs:

+    -    *    /    %

These are, in order, addition, subtraction, multiplication, division, and remainder. In the following table, the expressions on the left have the corresponding values on the right:

5 + 2       ⇒   7
5 - 2       ⇒   3
5 * 2       ⇒   10
5 / 2       ⇒   2
5.0 / 2.0   ⇒   2.5
5 % 2       ⇒   1
5.0 % 2.0   ⇒   1.0
5 % -2      ⇒   1
-5 % 2      ⇒   -1
-5 % -2     ⇒   -1
-(5 + 2)    ⇒   -7

Note that integer division in MOO throws away the remainder and that the result of the remainder operator (‘%’) has the same sign as the left-hand operand. Also, note that ‘-’ can be used without a left-hand operand to negate a numeric expression.

Fine point: Integers and floating-point numbers cannot be mixed in any particular use of these arithmetic operators; unlike some other programming languages, MOO does not automatically coerce integers into floating-point numbers. You can use the tofloat() function to perform an explicit conversion.

The ‘+’ operator can also be used to append two strings. The expression

"foo" + "bar"

has the value

"foobar"

Unless both operands to an arithmetic operator are numbers of the same kind (or, for ‘+’, both strings), the error value E_TYPE is raised. If the right-hand operand for the division or remainder operators (‘/’ or ‘%’) is zero, the error value E_DIV is raised.

MOO also supports the exponentiation operation, also known as “raising to a power,” using the ‘^’ operator:

3 ^ 4       ⇒   81
3 ^ 4.5     error-->   E_TYPE
3.5 ^ 4     ⇒   150.0625
3.5 ^ 4.5   ⇒   280.741230801382

Note that if the first operand is an integer, then the second operand must also be an integer. If the first operand is a floating-point number, then the second operand can be either kind of number. Although it is legal to raise an integer to a negative power, the result is unlikely to be terribly useful.

MOO also supports bitwise operations on integer types:

&.    |.    ^.    >>    <<    ~

These are, bitwise ‘and’, ‘or’, ‘xor’, logical (not arithmetic) right-shift, logical left-shift, and complement. In the following table, the expressions on the left have the corresponding values on the right:

1 &. 2       ⇒   0
1 |. 2       ⇒   3
1 ^. 3       ⇒   1
8 << 1       ⇒   16
8 >> 1       ⇒   4
~0           ⇒   -1

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.5 Comparing Values

Any two values can be compared for equality using ‘==’ and ‘!=’. The first of these returns 1 if the two values are equal and 0 otherwise; the second does the reverse:

3 == 4                              ⇒  0
3 != 4                              ⇒  1
3 == 3.0                            ⇒  0
"foo" == "Foo"                      ⇒  1
#34 != #34                          ⇒  0
{1, #34, "foo"} == {1, #34, "FoO"}  ⇒  1
E_DIV == E_TYPE                     ⇒  0
3 != "foo"                          ⇒  1

Note that integers and floating-point numbers are never equal to one another, even in the ‘obvious’ cases. Also note that comparison of strings (and list values containing strings) is case-insensitive; that is, it does not distinguish between the upper- and lower-case version of letters. To test two values for case-sensitive equality, use the ‘equal’ function described later.

Warning: It is easy (and very annoying) to confuse the equality-testing operator (‘==’) with the assignment operator (‘=’), leading to nasty, hard-to-find bugs. Don’t do this.

Numbers, object numbers, strings, and error values can also be compared for ordering purposes using the following operators:

<       <=      >=      >

meaning “less than,” “less than or equal,” “greater than or equal,” and “greater than,” respectively. As with the equality operators, these return 1 when their operands are in the appropriate relation and 0 otherwise:

3 < 4           ⇒  1
3 < 4.0         error-->  E_TYPE
#34 >= #32      ⇒  1
"foo" <= "Boo"  ⇒  0
E_DIV > E_TYPE  ⇒  1

Note that, as with the equality operators, strings are compared case-insensitively. To perform a case-sensitive string comparison, use the ‘strcmp’ function described later. Also note that the error values are ordered as given in the table in the section on values. If the operands to these four comparison operators are of different types (even integers and floating-point numbers are considered different types), or if they are lists, then E_TYPE is raised.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.6 Values as True and False

There is a notion in MOO of true and false values; every value is one or the other. The true values are as follows:

All other values are false:

There are four kinds of expressions and two kinds of statements that depend upon this classification of MOO values. In describing them, I sometimes refer to the truth value of a MOO value; this is just true or false, the category into which that MOO value is classified.

The conditional expression in MOO has the following form:

expression-1 ? expression-2 | expression-3

First, expression-1 is evaluated. If it returns a true value, then expression-2 is evaluated and whatever it returns is returned as the value of the conditional expression as a whole. If expression-1 returns a false value, then expression-3 is evaluated instead and its value is used as that of the conditional expression.

1 ? 2 | 3           ⇒  2
0 ? 2 | 3           ⇒  3
"foo" ? 17 | {#34}  ⇒  17

Note that only one of expression-2 and expression-3 is evaluated, never both.

To negate the truth value of a MOO value, use the ‘!’ operator:

! expression

If the value of expression is true, ‘!’ returns 0; otherwise, it returns 1:

! "foo"     ⇒  0
! (3 >= 4)  ⇒  1

The negation operator is usually read as “not.”

It is frequently useful to test more than one condition to see if some or all of them are true. MOO provides two operators for this:

expression-1 && expression-2
expression-1 || expression-2

These operators are usually read as “and” and “or,” respectively.

The ‘&&’ operator first evaluates expression-1. If it returns a true value, then expression-2 is evaluated and its value becomes the value of the ‘&&’ expression as a whole; otherwise, the value of expression-1 is used as the value of the ‘&&’ expression. Note that expression-2 is only evaluated if expression-1 returns a true value. The ‘&&’ expression is equivalent to the conditional expression

expression-1 ? expression-2 | expression-1

except that expression-1 is only evaluated once.

The ‘||’ operator works similarly, except that expression-2 is evaluated only if expression-1 returns a false value. It is equivalent to the conditional expression

expression-1 ? expression-1 | expression-2

except that, as with ‘&&’, expression-1 is only evaluated once.

These two operators behave very much like “and” and “or” in English:

1 && 1                  ⇒  1
0 && 1                  ⇒  0
0 && 0                  ⇒  0
1 || 1                  ⇒  1
0 || 1                  ⇒  1
0 || 0                  ⇒  0
17 <= 23  &&  23 <= 27  ⇒  1

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.7 Indexing into Lists, Maps and Strings

Lists, maps and strings can be seen as ordered sequences of MOO values. In the case of strings, each is a sequence of single-character strings; that is, one can view the string "bar" as a sequence of the strings "b", "a", and "r". MOO allows you to refer to the elements of lists and strings by number, by the index of that element in the list or string. The first element in a list or string has index 1, the second has index 2, and so on. MOO allows you to refer to the values of maps by the key associated with each value.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.7.1 Extracting an Element from a List, Map or String

The indexing expression in MOO extracts a specified element from a list, map or string:

expression-1[expression-2]

First, expression-1 is evaluated; it must return a list, map or a string (the sequence). Then, expression-2 is evaluated and must return an integer (the index) for lists and strings, or a non-collection value (the key) for maps. If either of the expressions returns some other type of value, E_TYPE is returned. For lists and strings, the index must be between 1 and the length of the sequence, inclusive; if it is not, then E_RANGE is raised. The value of the indexing expression is the index’th element in the sequence. For maps, the key must be present; if it is not, then E_RANGE is raised. The value of the indexing expression is the value associated with the given key. Anywhere within expression-2, you can use the symbol ^ as an expression returning the index or key of the first element in the sequence. Likewise, you can use the symbol $ as an expression returning the index or key of the last element in expression-1.

"fob"[2]                     ⇒  "o"
"fob"[1]                     ⇒  "f"
{#12, #23, #34}[$ - 1]       ⇒  #23
["foo" -> 1, "bar" -> 2][^]  ⇒  1

Note that there are no legal indices/keys for the empty string, list or map.

Fine point: The ^ and $ expressions actually return the first/last index/key of the expression just before the nearest enclosing […] indexing or subranging brackets. For example:

"frob"[{3, 2, 4}[^]]     ⇒  "o"
"frob"[{3, 2, 4}[$]]     ⇒  "b"

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.7.2 Replacing an Element of a List, Map or String

It often happens that one wants to change just one particular slot of a list, map or string, which is stored in a variable or a property. This can be done conveniently using an indexed assignment having one of the following forms:

variable[index-expr] = result-expr
object-expr.name[index-expr] = result-expr
object-expr.(name-expr)[index-expr] = result-expr
$name[index-expr] = result-expr

The first form writes into a variable, and the last three forms write into a property. The usual errors (E_TYPE, E_INVIND, E_PROPNF and E_PERM for lack of read/write permission on the property) may be raised, just as in reading and writing any object property; see the discussion of object property expressions below for details. Correspondingly, if variable does not yet have a value (i.e., it has never been assigned to), E_VARNF will be raised.

If index-expr is not an integer (for lists and strings) or is a collection value (for maps), or if the value of variable or the property is not a list, map or string, E_TYPE is raised. If result-expr is a string, but not of length 1, E_INVARG is raised. Suppose index-expr evaluates to a value k. If k is an integer and is outside the range of the list or string (i.e. smaller than 1 or greater than the length of the list or string), E_RANGE is raised. If k is not a valid key of the map, E_RANGE is raised. Otherwise, the actual assignment takes place. For lists, the variable or the property is assigned a new list that is identical to the original one except at the k-th position, where the new list contains the result of result-expr instead. Likewise for maps, the variable or the property is assigned a new map that is identical to the original one except for the k key, where the new map contains the result of result-expr instead. For strings, the variable or the property is assigned a new string that is identical to the original one, except the k-th character is changed to be result-expr.

The assignment expression itself returns the value of result-expr. For the following examples, assume that l initially contains the list {1, 2, 3}, that m initially contains the map ["one" -> 1, "two" -> 2] and that s initially contains the string "foobar":

l[5] = 3          error-->   E_RANGE
l["first"] = 4    error-->   E_TYPE
m[{}] = 5         error-->   E_TYPE
s[3] = "baz"      error-->   E_INVARG
l[2] = l[2] + 3   ⇒   5
l                 ⇒   {1, 5, 3}
l[2] = "foo"      ⇒   "foo"
l                 ⇒   {1, "foo", 3}
m["five"] = "bar" ⇒   "bar"
m                 ⇒   ["one" -> 1, "two" -> 2, "five" -> 5]
s[2] = "u"        ⇒   "u"
s                 ⇒   "fuobar"
s[$] = "z"        ⇒   "z"
s                 ⇒   "fuobaz"

Note that the ^ and $ expressions may also be used in indexed assignments with the same meaning as before.

Fine point: After an indexed assignment, the variable or property contains a new list, map or string, a copy of the original in all but the k-th place, where it contains a new value. In programming-language jargon, the original sequence is not mutated, and there is no aliasing. (Indeed, no MOO value is mutable and no aliasing ever occurs.)

In the list and map case, indexed assignment can be nested to many levels, to work on nested lists and maps. Assume that l initially contains the following

{{1, 2, 3}, {4, 5, 6}, "foo", ["bar" -> "baz"]}

in the following examples:

l[7] = 4             error-->   E_RANGE
l[1][8] = 35         error-->   E_RANGE
l[3][2] = 7          error-->   E_TYPE
l[1][1][1] = 3       error-->   E_TYPE
l[2][2] = -l[2][2]   ⇒   -5
l                    ⇒   {{1, 2, 3}, {4, -5, 6}, "foo", ["bar" -> "baz"]}
l[2] = "bar"         ⇒   "bar"
l                    ⇒   {{1, 2, 3}, "bar", "foo", ["bar" -> "baz"]}
l[2][$] = "z"        ⇒   "z"
l                    ⇒   {{1, 2, 3}, "baz", "foo", ["bar" -> "baz"]}
l[$][^] = #3         ⇒   #3
l                    ⇒   {{1, 2, 3}, "baz", "foo", ["bar" -> #3]}

The first two examples raise E_RANGE because 7 is out of the range of l and 8 is out of the range of l[1]. The next two examples raise E_TYPE because l[3] and l[1][1] are not lists.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.7.3 Extracting a Subsequence of a List, Map or String

The range expression extracts a specified subsequence from a list, map or string:

expression-1[expression-2..expression-3]

The three expressions are evaluated in order. Expression-1 must return a list, map or string (the sequence) and the other two expressions must return integers (the low and high indices, respectively) for lists and strings, or non-collection values (the begin and end keys in the ordered map, respectively) for maps; otherwise, E_TYPE is raised. The ^ and $ expressions can be used in either or both of expression-2 and expression-3 just as before.

If the low/begin index/key is greater than/after the high/end index, then the empty string, list or map is returned, depending on whether the sequence is a string, list or map. Otherwise, both indices must be between 1 and the length of the sequence (for lists or strings) or valid keys (for maps); E_RANGE is raised if they are not. A new list, map or string is returned that contains just the elements of the sequence with indices between the low/begin and high/end bounds.

"foobar"[2..$]                       ⇒  "oobar"
"foobar"[3..3]                       ⇒  "o"
"foobar"[17..12]                     ⇒  ""
{"one", "two", "three"}[$ - 1..$]    ⇒  {"two", "three"}
{"one", "two", "three"}[3..3]        ⇒  {"three"}
{"one", "two", "three"}[17..12]      ⇒  {}
[1 -> "one", 2 -> "two"][1..1]       ⇒  [1 -> "one"]

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.7.4 Replacing a Subsequence of a List, Map or String

The subrange assignment replaces a specified subsequence of a list, map or string with a supplied subsequence. The allowed forms are:

variable[start-index-expr..end-index-expr] = result-expr
object-expr.name[start-index-expr..end-index-expr] = result-expr
object-expr.(name-expr)[start-index-expr..end-index-expr] = result-expr
$name[start-index-expr..end-index-expr] = result-expr

As with indexed assignments, the first form writes into a variable, and the last three forms write into a property. The same errors (E_TYPE, E_INVIND, E_PROPNF and E_PERM for lack of read/write permission on the property) may be raised. If variable does not yet have a value (i.e., it has never been assigned to), E_VARNF will be raised. As before, the ^ and $ expressions can be used in either start-index-expr or end-index-expr.

If start-index-expr or end-index-expr is not an integer (for lists and strings) or is a collection value (for maps), if the value of variable or the property is not a list, map or string, or result-expr is not the same type as variable or the property, E_TYPE is raised. For lists and strings, E_RANGE is raised if end-index-expr is less than zero or if start-index-expr is greater than the length of the list or string plus one. Note: the length of result-expr does not need to be the same as the length of the specified range. For maps, E_RANGE is raised if start-index-expr or end-index-expr are not keys in the map.

In precise terms, the subrange assignment

v[start..end] = value

is equivalent to

v = {@v[1..start - 1], @value, @v[end + 1..$]}

if v is a list and to

v = v[1..start - 1] + value + v[end + 1..$]

if v is a string.

There is no literal representation of the operation if v is a map. In this case the range given by start-index-expr and end-index-expr is removed, and the the values in result-expr are added.

The assignment expression itself returns the value of result-expr. For the following examples, assume that l initially contains the list {1, 2, 3}, that m initially contains the map [1 -> "one", 2 -> "two", 3 -> "three"] and that s initially contains the string "foobar":

l[5..6] = {7, 8}          error-->   E_RANGE
l[2..3] = 4               error-->   E_TYPE
l[#2..3] = {7}            error-->   E_TYPE
s[2..3] = {6}             error-->   E_TYPE
l[2..3] = {6, 7, 8, 9}    ⇒   {6, 7, 8, 9}
l                         ⇒   {1, 6, 7, 8, 9}
l[2..1] = {10, "foo"}     ⇒   {10, "foo"}
l                         ⇒   {1, 10, "foo", 6, 7, 8, 9}
l[3][2..$] = "u"          ⇒   "u"
l                         ⇒   {1, 10, "fu", 6, 7, 8, 9}
s[7..12] = "baz"          ⇒   "baz"
s                         ⇒   "foobarbaz"
s[1..3] = "fu"            ⇒   "fu"
s                         ⇒   "fubarbaz"
s[1..0] = "test"          ⇒   "test"
s                         ⇒   "testfubarbaz"
m[1..2] = ["abc" -> #1]   ⇒   ["abc" -> #1]
m                         ⇒   [3 -> "three", "abc" -> #1]

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.8 Other Operations on Lists

As was mentioned earlier, lists can be constructed by writing a comma-separated sequence of expressions inside curly braces:

{expression-1, expression-2, …, expression-N}

The resulting list has the value of expression-1 as its first element, that of expression-2 as the second, etc.

{3 < 4, 3 <= 4, 3 >= 4, 3 > 4}  ⇒  {1, 1, 0, 0}

Additionally, one may precede any of these expressions by the splicing operator, ‘@’. Such an expression must return a list; rather than the old list itself becoming an element of the new list, all of the elements of the old list are included in the new list. This concept is easy to understand, but hard to explain in words, so here are some examples. For these examples, assume that the variable a has the value {2, 3, 4} and that b has the value {"Foo", "Bar"}:

{1, a, 5}   ⇒  {1, {2, 3, 4}, 5}
{1, @a, 5}  ⇒  {1, 2, 3, 4, 5}
{a, @a}     ⇒  {{2, 3, 4}, 2, 3, 4}
{@a, @b}    ⇒  {2, 3, 4, "Foo", "Bar"}

If the splicing operator (‘@’) precedes an expression whose value is not a list, then E_TYPE is raised as the value of the list construction as a whole.

The list membership expression tests whether or not a given MOO value is an element of a given list and, if so, with what index:

expression-1 in expression-2

Expression-2 must return a list; otherwise, E_TYPE is raised. If the value of expression-1 is in that list, then the index of its first occurrence in the list is returned; otherwise, the ‘in’ expression returns 0.

2 in {5, 8, 2, 3}               ⇒  3
7 in {5, 8, 2, 3}               ⇒  0
"bar" in {"Foo", "Bar", "Baz"}  ⇒  2

Note that the list membership operator is case-insensitive in comparing strings, just like the comparison operators. To perform a case-sensitive list membership test, use the ‘is_member’ function described later. Note also that since it returns zero only if the given value is not in the given list, the ‘in’ expression can be used either as a membership test or as an element locator.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.9 Spreading List Elements Among Variables

It is often the case in MOO programming that you will want to access the elements of a list individually, with each element stored in a separate variables. This desire arises, for example, at the beginning of almost every MOO verb, since the arguments to all verbs are delivered all bunched together in a single list. In such circumstances, you could write statements like these:

first = args[1];
second = args[2];
if (length(args) > 2)
  third = args[3];
else
  third = 0;
endif

This approach gets pretty tedious, both to read and to write, and it’s prone to errors if you mistype one of the indices. Also, you often want to check whether or not any extra list elements were present, adding to the tedium.

MOO provides a special kind of assignment expression, called scattering assignment made just for cases such as these. A scattering assignment expression looks like this:

{target, …} = expr

where each target describes a place to store elements of the list that results from evaluating expr. A target has one of the following forms:

variable

This is the simplest target, just a simple variable; the list element in the corresponding position is assigned to the variable. This is called a required target, since the assignment is required to put one of the list elements into the variable.

?variable

This is called an optional target, since it doesn’t always get assigned an element. If there are any list elements left over after all of the required targets have been accounted for (along with all of the other optionals to the left of this one), then this variable is treated like a required one and the list element in the corresponding position is assigned to the variable. If there aren’t enough elements to assign one to this target, then no assignment is made to this variable, leaving it with whatever its previous value was.

?variable = default-expr

This is also an optional target, but if there aren’t enough list elements available to assign one to this target, the result of evaluating default-expr is assigned to it instead. Thus, default-expr provides a default value for the variable. The default value expressions are evaluated and assigned working from left to right after all of the other assignments have been performed.

@variable

By analogy with the @ syntax in list construction, this variable is assigned a list of all of the ‘leftover’ list elements in this part of the list after all of the other targets have been filled in. It is assigned the empty list if there aren’t any elements left over. This is called a rest target, since it gets the rest of the elements. There may be at most one rest target in each scattering assignment expression.

If there aren’t enough list elements to fill all of the required targets, or if there are more than enough to fill all of the required and optional targets but there isn’t a rest target to take the leftover ones, then E_ARGS is raised.

Here are some examples of how this works. Assume first that the verb me:foo() contains the following code:

b = c = e = 17;
{a, ?b, ?c = 8, @d, ?e = 9, f} = args;
return {a, b, c, d, e, f};

Then the following calls return the given values:

me:foo(1)                        error-->   E_ARGS
me:foo(1, 2)                     ⇒   {1, 17, 8, {}, 9, 2}
me:foo(1, 2, 3)                  ⇒   {1, 2, 8, {}, 9, 3}
me:foo(1, 2, 3, 4)               ⇒   {1, 2, 3, {}, 9, 4}
me:foo(1, 2, 3, 4, 5)            ⇒   {1, 2, 3, {}, 4, 5}
me:foo(1, 2, 3, 4, 5, 6)         ⇒   {1, 2, 3, {4}, 5, 6}
me:foo(1, 2, 3, 4, 5, 6, 7)      ⇒   {1, 2, 3, {4, 5}, 6, 7}
me:foo(1, 2, 3, 4, 5, 6, 7, 8)   ⇒   {1, 2, 3, {4, 5, 6}, 7, 8}

Using scattering assignment, the example at the begining of this section could be rewritten more simply, reliably, and readably:

{first, second, ?third = 0} = args;

It is good MOO programming style to use a scattering assignment at the top of nearly every verb, since it shows so clearly just what kinds of arguments the verb expects.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.10 Getting and Setting the Values of Properties

Usually, one can read the value of a property on an object with a simple expression:

expression.name

Expression must return an object; if not, E_TYPE is raised. If the object does not exist, E_INVIND is raised. Otherwise, if the object does not have a property with that name, then E_PROPNF is raised. Otherwise, if the named property is not readable by the owner of the current verb, then E_PERM is raised. Finally, assuming that none of these terrible things happens, the value of the named property on the given object is returned.

I said “usually” in the paragraph above because that simple expression only works if the name of the property obeys the same rules as for the names of variables (i.e., consists entirely of letters, digits, and underscores, and doesn’t begin with a digit). Property names are not restricted to this set, though. Also, it is sometimes useful to be able to figure out what property to read by some computation. For these more general uses, the following syntax is also allowed:

expression-1.(expression-2)

As before, expression-1 must return an object. Expression-2 must return a string, the name of the property to be read; E_TYPE is raised otherwise. Using this syntax, any property can be read, regardless of its name.

Note that, as with almost everything in MOO, case is not significant in the names of properties. Thus, the following expressions are all equivalent:

foo.bar
foo.Bar
foo.("bAr")

The LambdaCore database uses several properties on #0, the system object, for various special purposes. For example, the value of #0.room is the “generic room” object, #0.exit is the “generic exit” object, etc. This allows MOO programs to refer to these useful objects more easily (and more readably) than using their object numbers directly. To make this usage even easier and more readable, the expression

$name

(where name obeys the rules for variable names) is an abbreviation for

#0.name

Thus, for example, the value $nothing mentioned earlier is really #-1, the value of #0.nothing.

As with variables, one uses the assignment operator (‘=’) to change the value of a property. For example, the expression

14 + (#27.foo = 17)

changes the value of the ‘foo’ property of the object numbered 27 to be 17 and then returns 31. Assignments to properties check that the owner of the current verb has write permission on the given property, raising E_PERM otherwise. Read permission is not required.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.11 Calling Built-in Functions and Other Verbs

MOO provides a large number of useful functions for performing a wide variety of operations; a complete list, giving their names, arguments, and semantics, appears in a separate section later. As an example to give you the idea, there is a function named ‘length’ that returns the length of a given string or list.

The syntax of a call to a function is as follows:

name(expr-1, expr-2, …, expr-N)

where name is the name of one of the built-in functions. The expressions between the parentheses, called arguments, are each evaluated in turn and then given to the named function to use in its appropriate way. Most functions require that a specific number of arguments be given; otherwise, E_ARGS is raised. Most also require that certain of the arguments have certain specified types (e.g., the length() function requires a list or a string as its argument); E_TYPE is raised if any argument has the wrong type.

As with list construction, the splicing operator ‘@’ can precede any argument expression. The value of such an expression must be a list; E_TYPE is raised otherwise. The elements of this list are passed as individual arguments, in place of the list as a whole.

Verbs can also call other verbs, usually using this syntax:

expr-0:name(expr-1, expr-2, …, expr-N)

Expr-0 must return an object; E_TYPE is raised otherwise. If the object does not exist, E_INVIND is raised. If this task is too deeply nested in verbs calling verbs calling verbs, then E_MAXREC is raised; the default limit is 50 levels, but this can be changed from within the database; see the chapter on server assumptions about the database for details. If neither the object nor any of its ancestors defines a verb matching the given name, E_VERBNF is raised. Otherwise, if none of these nasty things happens, the named verb on the given object is called; the various built-in variables have the following initial values in the called verb:

this

an object, the value of expr-0

verb

a string, the name used in calling this verb

args

a list, the values of expr-1, expr-2, etc.

caller

an object, the value of this in the calling verb

player

an object, the same value as it had initially in the calling verb or, if the calling verb is running with wizard permissions, the same as the current value in the calling verb.

All other built-in variables (argstr, dobj, etc.) are initialized with the same values they have in the calling verb.

As with the discussion of property references above, I said “usually” at the beginning of the previous paragraph because that syntax is only allowed when the name follows the rules for allowed variable names. Also as with property reference, there is a syntax allowing you to compute the name of the verb:

expr-0:(expr-00)(expr-1, expr-2, …, expr-N)

The expression expr-00 must return a string; E_TYPE is raised otherwise.

The splicing operator (‘@’) can be used with verb-call arguments, too, just as with the arguments to built-in functions.

In many databases, a number of important verbs are defined on #0, the system object. As with the ‘$foo’ notation for properties on #0, the server defines a special syntax for calling verbs on #0:

$name(expr-1, expr-2, …, expr-N)

(where name obeys the rules for variable names) is an abbreviation for

#0:name(expr-1, expr-2, …, expr-N)

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.12 Catching Errors in Expressions

It is often useful to be able to catch an error that an expression raises, to keep the error from aborting the whole task, and to keep on running as if the expression had returned some other value normally. The following expression accomplishes this:

` expr-1 ! codes => expr-2 '

Note: The open- and close-quotation marks in the previous line are really part of the syntax; you must actually type them as part of your MOO program for this kind of expression.

The codes part is either the keyword ANY or else a comma-separated list of expressions, just like an argument list. As in an argument list, the splicing operator (‘@’) can be used here. The => expr-2 part of the error-catching expression is optional.

First, the codes part is evaluated, yielding a list of error codes that should be caught if they’re raised; if codes is ANY, then it is equivalent to the list of all possible MOO values.

Next, expr-1 is evaluated. If it evaluates normally, without raising an error, then its value becomes the value of the entire error-catching expression. If evaluating expr-1 results in an error being raised, then call that error E. If E is in the list resulting from evaluating codes, then E is considered caught by this error-catching expression. In such a case, if expr-2 was given, it is evaluated to get the outcome of the entire error-catching expression; if expr-2 was omitted, then E becomes the value of the entire expression. If E is not in the list resulting from codes, then this expression does not catch the error at all and it continues to be raised, possibly to be caught by some piece of code either surrounding this expression or higher up on the verb-call stack.

Here are some examples of the use of this kind of expression:

`x + 1 ! E_TYPE => 0'

Returns x + 1 if x is an integer, returns 0 if x is not an integer, and raises E_VARNF if x doesn’t have a value.

`x.y ! E_PROPNF, E_PERM => 17'

Returns x.y if that doesn’t cause an error, 17 if x doesn’t have a y property or that property isn’t readable, and raises some other kind of error (like E_INVIND) if x.y does.

`1 / 0 ! ANY'

Returns E_DIV.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1.13 Parentheses and Operator Precedence

As shown in a few examples above, MOO allows you to use parentheses to make it clear how you intend for complex expressions to be grouped. For example, the expression

3 * (4 + 5)

performs the addition of 4 and 5 before multiplying the result by 3.

If you leave out the parentheses, MOO will figure out how to group the expression according to certain rules. The first of these is that some operators have higher precedence than others; operators with higher precedence will more tightly bind to their operands than those with lower precedence. For example, multiplication has higher precedence than addition; thus, if the parentheses had been left out of the expression in the previous paragraph, MOO would have grouped it as follows:

(3 * 4) + 5

The table below gives the relative precedence of all of the MOO operators; operators on higher lines in the table have higher precedence and those on the same line have identical precedence:

!       - (without a left operand)
^
*       /       %
+       -
==      !=      <       <=      >       >=      in
&&      ||
… ? … | … (the conditional expression)
=

Thus, the horrendous expression

x = a < b && c > d + e * f ? w in y | - q - r

would be grouped as follows:

x = (((a < b) && (c > (d + (e * f)))) ? (w in y) | ((- q) - r))

It is best to keep expressions simpler than this and to use parentheses liberally to make your meaning clear to other humans.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2 MOO Language Statements

Statements are MOO constructs that, in contrast to expressions, perform some useful, non-value-producing operation. For example, there are several kinds of statements, called ‘looping constructs’, that repeatedly perform some set of operations. Fortunately, there are many fewer kinds of statements in MOO than there are kinds of expressions.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.1 Errors While Executing Statements

Statements do not return values, but some kinds of statements can, under certain circumstances described below, generate errors. If such an error is generated in a verb whose ‘d’ (debug) bit is not set, then the error is ignored and the statement that generated it is simply skipped; execution proceeds with the next statement.

Note: This error-ignoring behavior is very error prone, since it affects all errors, including ones the programmer may not have anticipated. The ‘d’ bit exists only for historical reasons; it was once the only way for MOO programmers to catch and handle errors. The error-catching expression and the try-except statement are far better ways of accomplishing the same thing.

If the ‘d’ bit is set, as it usually is, then the error is raised and can be caught and handled either by code surrounding the expression in question or by verbs higher up on the chain of calls leading to the current verb. If the error is not caught, then the server aborts the entire task and, by default, prints a message to the current player. See the descriptions of the error-catching expression and the try-except statement for the details of how errors can be caught, and the chapter on server assumptions about the database for details on the handling of uncaught errors.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.2 Simple Statements

The simplest kind of statement is the null statement, consisting of just a semicolon:

;

It doesn’t do anything at all, but it does it very quickly.

The next simplest statement is also one of the most common, the expression statement, consisting of any expression followed by a semicolon:

expression;

The given expression is evaluated and the resulting value is ignored. Commonly-used kinds of expressions for such statements include assignments and verb calls. Of course, there’s no use for such a statement unless the evaluation of expression has some side-effect, such as changing the value of some variable or property, printing some text on someone’s screen, etc.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.3 Statements for Testing Conditions

The ‘if’ statement allows you to decide whether or not to perform some statements based on the value of an arbitrary expression:

if (expression)
  statements
endif

Expression is evaluated and, if it returns a true value, the statements are executed in order; otherwise, nothing more is done.

One frequently wants to perform one set of statements if some condition is true and some other set of statements otherwise. The optional ‘else’ phrase in an ‘if’ statement allows you to do this:

if (expression)
  statements-1
else
  statements-2
endif

This statement is executed just like the previous one, except that statements-1 are executed if expression returns a true value and statements-2 are executed otherwise.

Sometimes, one needs to test several conditions in a kind of nested fashion:

if (expression-1)
  statements-1
else
  if (expression-2)
    statements-2
  else
    if (expression-3)
      statements-3
    else
      statements-4
    endif
  endif
endif

Such code can easily become tedious to write and difficult to read. MOO provides a somewhat simpler notation for such cases:

if (expression-1)
  statements-1
elseif (expression-2)
  statements-2
elseif (expression-3)
  statements-3
else
  statements-4
endif

Note that ‘elseif’ is written as a single word, without any spaces. This simpler version has the very same meaning as the original: evaluate expression-i for i equal to 1, 2, and 3, in turn, until one of them returns a true value; then execute the statements-i associated with that expression. If none of the expression-i return a true value, then execute statements-4.

Any number of ‘elseif’ phrases can appear, each having this form:

elseif (expression) statements

The complete syntax of the ‘if’ statement, therefore, is as follows:

if (expression)
  statements
zero-or-more-elseif-phrases
an-optional-else-phrase
endif

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.4 Statements for Looping

MOO provides three different kinds of looping statements, allowing you to have a set of statements executed (1) once for each element of a given sequence (list, map or string); (2) once for each integer or object number in a given range; and (3) over and over until a given condition stops being true.

To perform some statements once for each element of a given sequence, use this syntax:

for value, key-or-index in (expression)
  statements
endfor

The expression is evaluated and should return a list, map or string; if it does not, E_TYPE is raised. The statements are then executed once for each element of that sequence in turn; each time, the given value is assigned the value of the element in question, and key-or-index is assigned the index of value in the list or string, or its key if the sequence is a map. key-or-index is optional. For example, consider the following statements:

odds = {1, 3, 5, 7, 9};
evens = {};
for n in (odds)
  evens = {@evens, n + 1};
endfor

The value of the variable ‘evens’ after executing these statements is the list

{2, 4, 6, 8, 10}

If the example were modified:

odds = {1, 3, 5, 7, 9};
pairs = [];
for n, i in (odds)
  pairs[i] = n + 1;
endfor

The value of the variable ‘pairs’ after executing these statements is the map

[1 -> 2, 2 -> 4, 3 -> 6, 4 -> 8, 5 -> 10]

To perform a set of statements once for each integer or object number in a given range, use this syntax:

for variable in [expression-1..expression-2]
  statements
endfor

The two expressions are evaluated in turn and should either both return integers or both return object numbers; E_TYPE is raised otherwise. The statements are then executed once for each integer (or object number, as appropriate) greater than or equal to the value of expression-1 and less than or equal to the result of expression-2, in increasing order. Each time, the given variable is assigned the integer or object number in question. For example, consider the following statements:

evens = {};
for n in [1..5]
  evens = {@evens, 2 * n};
endfor

The value of the variable ‘evens’ after executing these statements is just as in the previous example: the list

{2, 4, 6, 8, 10}

The following loop over object numbers prints out the number and name of every valid object in the database:

for o in [#0..max_object()]
  if (valid(o))
    notify(player, tostr(o, ": ", o.name));
  endif
endfor

The final kind of loop in MOO executes a set of statements repeatedly as long as a given condition remains true:

while (expression)
  statements
endwhile

The expression is evaluated and, if it returns a true value, the statements are executed; then, execution of the ‘while’ statement begins all over again with the evaluation of the expression. That is, execution alternates between evaluating the expression and executing the statements until the expression returns a false value. The following example code has precisely the same effect as the loop just shown above:

evens = {};
n = 1;
while (n <= 5)
  evens = {@evens, 2 * n};
  n = n + 1;
endwhile

Fine point: It is also possible to give a ‘name’ to a ‘while’ loop, using this syntax:

while name (expression)
  statements
endwhile

which has precisely the same effect as

while (name = expression)
  statements
endwhile

This naming facility is only really useful in conjunction with the ‘break’ and ‘continue’ statements, described in the next section.

With each kind of loop, it is possible that the statements in the body of the loop will never be executed at all. For iteration over lists, this happens when the list returned by the expression is empty. For iteration on integers, it happens when expression-1 returns a larger integer than expression-2. Finally, for the ‘while’ loop, it happens if the expression returns a false value the very first time it is evaluated.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.5 Terminating One or All Iterations of a Loop

Sometimes, it is useful to exit a loop before it finishes all of its iterations. For example, if the loop is used to search for a particular kind of element of a list, then it might make sense to stop looping as soon as the right kind of element is found, even if there are more elements yet to see. The ‘break’ statement is used for this purpose; it has the form

break;

or

break name;

Each ‘break’ statement indicates a specific surrounding loop; if name is not given, the statement refers to the innermost one. If it is given, name must be the name appearing right after the ‘for’ or ‘while’ keyword of the desired enclosing loop. When the ‘break’ statement is executed, the indicated loop is immediately terminated and executing continues just as if the loop had completed its iterations normally.

MOO also allows you to terminate just the current iteration of a loop, making it immediately go on to the next one, if any. The ‘continue’ statement does this; it has precisely the same forms as the ‘break’ statement:

continue;

or

continue name;

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.6 Returning a Value from a Verb

The MOO program in a verb is just a sequence of statements. Normally, when the verb is called, those statements are simply executed in order and then the integer 0 is returned as the value of the verb-call expression. Using the ‘return’ statement, one can change this behavior. The ‘return’ statement has one of the following two forms:

return;

or

return expression;

When it is executed, execution of the current verb is terminated immediately after evaluating the given expression, if any. The verb-call expression that started the execution of this verb then returns either the value of expression or the integer 0, if no expression was provided.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.7 Handling Errors in Statements

Normally, whenever a piece of MOO code raises an error, the entire task is aborted and a message printed to the user. Often, such errors can be anticipated in advance by the programmer and code written to deal with them in a more graceful manner. The try-except statement allows you to do this; the syntax is as follows:

try
  statements-0
except variable-1 (codes-1)
  statements-1
except variable-2 (codes-2)
  statements-2
…
endtry

where the variables may be omitted and each codes part is either the keyword ANY or else a comma-separated list of expressions, just like an argument list. As in an argument list, the splicing operator (‘@’) can be used here. There can be anywhere from 1 to 255 except clauses.

First, each codes part is evaluated, yielding a list of error codes that should be caught if they’re raised; if a codes is ANY, then it is equivalent to the list of all possible MOO values.

Next, statements-0 is executed; if it doesn’t raise an error, then that’s all that happens for the entire try-except statement. Otherwise, let E be the error it raises. From top to bottom, E is searched for in the lists resulting from the various codes parts; if it isn’t found in any of them, then it continues to be raised, possibly to be caught by some piece of code either surrounding this try-except statement or higher up on the verb-call stack.

If E is found first in codes-i, then variable-i (if provided) is assigned a value containing information about the error being raised and statements-i is executed. The value assigned to variable-i is a list of four elements:

{code, message, value, traceback}

where code is E, the error being raised, message and value are as provided by the code that raised the error, and traceback is a list like that returned by the ‘callers()’ function, including line numbers. The traceback list contains entries for every verb from the one that raised the error through the one containing this try-except statement.

Unless otherwise mentioned, all of the built-in errors raised by expressions, statements, and functions provide tostr(code) as message and zero as value.

Here’s an example of the use of this kind of statement:

try
  result = object:(command)(@arguments);
  player:tell("=> ", toliteral(result));
except v (ANY)
  tb = v[4];
  if (length(tb) == 1)
    player:tell("** Illegal command: ", v[2]);
  else
    top = tb[1];
    tb[1..1] = {};
    player:tell(top[1], ":", top[2], ", line ", top[6], ":",
                v[2]);
    for fr in (tb)
      player:tell("... called from ", fr[1], ":", fr[2],
                  ", line ", fr[6]);
    endfor
    player:tell("(End of traceback)");
  endif
endtry

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.8 Cleaning Up After Errors

Whenever an error is raised, it is usually the case that at least some MOO code gets skipped over and never executed. Sometimes, it’s important that a piece of code always be executed, whether or not an error is raised. Use the try-finally statement for these cases; it has the following syntax:

try
  statements-1
finally
  statements-2
endtry

First, statements-1 is executed; if it completes without raising an error, returning from this verb, or terminating the current iteration of a surrounding loop (we call these possibilities transferring control), then statements-2 is executed and that’s all that happens for the entire try-finally statement.

Otherwise, the process of transferring control is interrupted and statments-2 is executed. If statements-2 itself completes without transferring control, then the interrupted control transfer is resumed just where it left off. If statements-2 does transfer control, then the interrupted transfer is simply forgotten in favor of the new one.

In short, this statement ensures that statements-2 is executed after control leaves statements-1 for whatever reason; it can thus be used to make sure that some piece of cleanup code is run even if statements-1 doesn’t simply run normally to completion.

Here’s an example:

try
  start = time();
  object:(command)(@arguments);
finally
  end = time();
  this:charge_user_for_seconds(player, end - start);
endtry

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.2.9 Executing Statements at a Later Time

It is sometimes useful to have some sequence of statements execute at a later time, without human intervention. For example, one might implement an object that, when thrown into the air, eventually falls back to the ground; the ‘throw’ verb on that object should arrange to print a message about the object landing on the ground, but the message shouldn’t be printed until some number of seconds have passed.

The ‘fork’ statement is intended for just such situations and has the following syntax:

fork (expression)
  statements
endfork

The ‘fork’ statement first executes the expression, which must return a integer; call that integer n. It then creates a new MOO task that will, after at least n seconds, execute the statements. When the new task begins, all variables will have the values they had at the time the ‘fork’ statement was executed. The task executing the ‘fork’ statement immediately continues execution. The concept of tasks is discussed in detail in the next section.

By default, there is no limit to the number of tasks any player may fork, but such a limit can be imposed from within the database. See the chapter on server assumptions about the database for details.

Occasionally, one would like to be able to kill a forked task before it even starts; for example, some player might have caught the object that was thrown into the air, so no message should be printed about it hitting the ground. If a variable name is given after the ‘fork’ keyword, like this:

fork name (expression)
  statements
endfork

then that variable is assigned the task ID of the newly-created task. The value of this variable is visible both to the task executing the fork statement and to the statements in the newly-created task. This ID can be passed to the kill_task() function to keep the task from running and will be the value of task_id() once the task begins execution.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.3 MOO Tasks

A task is an execution of a MOO program. There are five kinds of tasks in LambdaMOO:

The last three kinds of tasks above are collectively known as queued tasks or background tasks, since they may not run immediately.

To prevent a maliciously- or incorrectly-written MOO program from running forever and monopolizing the server, limits are placed on the running time of every task. One limit is that no task is allowed to run longer than a certain number of seconds; command and server tasks get five seconds each while other tasks get only three seconds. This limit is, in practice, rarely reached. The reason is that there is also a limit on the number of operations a task may execute.

The server counts down ticks as any task executes. Roughly speaking, it counts one tick for every expression evaluation (other than variables and literals), one for every ‘if’, ‘fork’ or ‘return’ statement, and one for every iteration of a loop. If the count gets all the way down to zero, the task is immediately and unceremoniously aborted. By default, command and server tasks begin with an store of 60,000 ticks; this is enough for almost all normal uses. Forked, suspended, and reading tasks are allotted 30,000 ticks each.

These limits on seconds and ticks may be changed from within the database, as can the behavior of the server after it aborts a task for running out; see the chapter on server assumptions about the database for details.

Because queued tasks may exist for long periods of time before they begin execution, there are functions to list the ones that you own and to kill them before they execute. These functions, among others, are discussed in the following section.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4 Built-in Functions

There are a large number of built-in functions available for use by MOO programmers. Each one is discussed in detail in this section. The presentation is broken up into subsections by grouping together functions with similar or related uses.

For most functions, the expected types of the arguments are given; if the actual arguments are not of these types, E_TYPE is raised. Some arguments can be of any type at all; in such cases, no type specification is given for the argument. Also, for most functions, the type of the result of the function is given. Some functions do not return a useful result; in such cases, the specification ‘none’ is used. A few functions can potentially return any type of value at all; in such cases, the specification ‘value’ is used.

Most functions take a certain fixed number of required arguments and, in some cases, one or two optional arguments. If a function is called with too many or too few arguments, E_ARGS is raised.

Functions are always called by the program for some verb; that program is running with the permissions of some player, usually the owner of the verb in question (it is not always the owner, though; wizards can use set_task_perms() to change the permissions ‘on the fly’). In the function descriptions below, we refer to the player whose permissions are being used as the programmer.

Many built-in functions are described below as raising E_PERM unless the programmer meets certain specified criteria. It is possible to restrict use of any function, however, so that only wizards can use it; see the chapter on server assumptions about the database for details.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.1 Object-Oriented Programming

One of the most important facilities in an object-oriented programming language is ability for a child object to make use of a parents’ implementation of some operation, even when the child provides its own definition for that operation. The pass() function provides this facility in MOO.

Function: value pass (arg, …)

Often, it is useful for a child object to define a verb that augments the behavior of a verb on a parent object. For example, in the LambdaCore database, the root object (which is an ancestor of every other object) defines a verb called ‘description’ that simply returns the value of this.description; this verb is used by the implementation of the look command. In many cases, a programmer would like the description of some object to include some non-constant part; for example, a sentence about whether or not the object was ‘awake’ or ‘sleeping’. This sentence should be added onto the end of the normal description. The programmer would like to have a means of calling the normal description verb and then appending the sentence onto the end of that description. The function ‘pass()’ is for exactly such situations.

pass calls the verb with the same name as the current verb but as defined on a parent of the object that defines the current verb. The arguments given to pass are the ones given to the called verb and the returned value of the called verb is returned from the call to pass. The initial value of this in the called verb is the same as in the calling verb.

Thus, in the example above, the child-object’s description verb might have the following implementation:

return pass() + "  It is " + (this.awake ? "awake." | "sleeping.");

That is, it calls its parent’s description verb and then appends to the result a sentence whose content is computed based on the value of a property on the object.

In almost all cases, you will want to call ‘pass()’ with the same arguments as were given to the current verb. This is easy to write in MOO; just call pass(@args).


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.2 Manipulating MOO Values

There are several functions for performing primitive operations on MOO values, and they can be cleanly split into two kinds: those that do various very general operations that apply to all types of values, and those that are specific to one particular type. There are so many operations concerned with objects that we do not list them in this section but rather give them their own section following this one.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.2.1 General Operations Applicable to all Values

Function: int typeof (value)

Takes any MOO value and returns an integer representing the type of value. The result is the same as the initial value of one of these built-in variables: INT, FLOAT, STR, LIST, MAP, OBJ, or ERR. Thus, one usually writes code like this:

if (typeof(x) == LIST) …

and not like this:

if (typeof(x) == 3) …

because the former is much more readable than the latter.

Function: str tostr (value, …)

Converts all of the given MOO values into strings and returns the concatenation of the results.

tostr(17)                  ⇒   "17"
tostr(1.0/3.0)             ⇒   "0.333333333333333"
tostr(#17)                 ⇒   "#17"
tostr("foo")               ⇒   "foo"
tostr({1, 2})              ⇒   "{list}"
tostr([1 -> 2])            ⇒   "[map]"
tostr(E_PERM)              ⇒   "Permission denied"
tostr("3 + 4 = ", 3 + 4)   ⇒   "3 + 4 = 7"

Note that tostr() does not do a good job of converting types like lists and maps into strings; all lists, including the empty list, are converted into the string "{list}", and all maps are converted into the string "[map]". The function toliteral(), below, is better for this purpose.

Function: str toliteral (value)

Returns a string containing a MOO literal expression that, when evaluated, would be equal to value.

toliteral(17)         ⇒   "17"
toliteral(1.0/3.0)    ⇒   "0.333333333333333"
toliteral(#17)        ⇒   "#17"
toliteral("foo")      ⇒   "\"foo\""
toliteral({1, 2})     ⇒   "{1, 2}"
toliteral([1 -> 2])   ⇒   "[1 -> 2]"
toliteral(E_PERM)     ⇒   "E_PERM"
Function: int toint (value)
Function: int tonum (value)

Converts the given MOO value into an integer and returns that integer. Floating-point numbers are rounded toward zero, truncating their fractional parts. Object numbers are converted into the equivalent integers. Strings are parsed as the decimal encoding of a real number which is then converted to an integer. Errors are converted into integers obeying the same ordering (with respect to <= as the errors themselves. Toint() raises E_TYPE if value is a list. If value is a string but the string does not contain a syntactically-correct number, then toint() returns 0.

toint(34.7)        ⇒   34
toint(-34.7)       ⇒   -34
toint(#34)         ⇒   34
toint("34")        ⇒   34
toint("34.7")      ⇒   34
toint(" - 34  ")   ⇒   -34
toint(E_TYPE)      ⇒   1
Function: obj toobj (value)

Converts the given MOO value into an object number and returns that object number. The conversions are very similar to those for toint() except that for strings, the number may be preceded by ‘#’.

toobj("34")       ⇒   #34
toobj("#34")      ⇒   #34
toobj("foo")      ⇒   #0
toobj({1, 2})     error-->   E_TYPE
Function: float tofloat (value)

Converts the given MOO value into a floating-point number and returns that number. Integers and object numbers are converted into the corresponding integral floating-point numbers. Strings are parsed as the decimal encoding of a real number which is then represented as closely as possible as a floating-point number. Errors are first converted to integers as in toint() and then converted as integers are. Tofloat() raises E_TYPE if value is a list. If value is a string but the string does not contain a syntactically-correct number, then tofloat() returns 0.

tofloat(34)          ⇒   34.0
tofloat(#34)         ⇒   34.0
tofloat("34")        ⇒   34.0
tofloat("34.7")      ⇒   34.7
tofloat(E_TYPE)      ⇒   1.0
Function: int equal (value1, value2)

Returns true if value1 is completely indistinguishable from value2. This is much the same operation as “value1 == value2” except that, unlike ==, the equal() function does not treat upper- and lower-case characters in strings as equal.

"Foo" == "foo"         ⇒   1
equal("Foo", "foo")    ⇒   0
equal("Foo", "Foo")    ⇒   1
Function: int value_bytes (value)

Returns the number of bytes of the server’s memory required to store the given value.

Function: str value_hash (value [, str algo [, binary]])

Returns the same string as string_hash(toliteral(value), ...); see the description of string_hash() for details.

Function: str value_hmac (value, str key [, str algo [, binary]])

Returns the same string as string_hmac(toliteral(value), key, ...); see the description of string_hmac() for details.

Function: str generate_json (value [, str mode])

Returns the JSON representation of the MOO value.

MOO supports a richer set of values than JSON allows. The optional mode specifies how this function handles the conversion of MOO values into their JSON representation.

The common subset mode, specified by the literal mode string "common-subset", is the default conversion mode. In this mode, only the common subset of types (strings and numbers) are translated with fidelity between MOO types and JSON types. All other types are treated as alternative representations of the string type. This mode is useful for integration with non-MOO applications.

The embedded types mode, specified by the literal mode string "embedded-types", adds type information. Specifically, values other than strings and numbers, which carry implicit type information, are converted into strings with type information appended. The converted string consists of the string representation of the value (as if tostr() were applied) followed by the pipe (|) character and the type. This mode is useful for serializing/deserializing objects and collections of MOO values.

generate_json([])                                           ⇒   "{}"
generate_json(["foo" -> "bar"])                             ⇒   "{\"foo\":\"bar\"}"
generate_json(["foo" -> "bar"], "common-subset")            ⇒   "{\"foo\":\"bar\"}"
generate_json(["foo" -> "bar"], "embedded-types")           ⇒   "{\"foo\":\"bar\"}"
generate_json(["foo" -> 1.1])                               ⇒   "{\"foo\":1.1}"
generate_json(["foo" -> 1.1], "common-subset")              ⇒   "{\"foo\":1.1}"
generate_json(["foo" -> 1.1], "embedded-types")             ⇒   "{\"foo\":1.1}"
generate_json(["foo" -> #1])                                ⇒   "{\"foo\":\"#1\"}"
generate_json(["foo" -> #1], "common-subset")               ⇒   "{\"foo\":\"#1\"}"
generate_json(["foo" -> #1], "embedded-types")              ⇒   "{\"foo\":\"#1|obj\"}"
generate_json(["foo" -> E_PERM])                            ⇒   "{\"foo\":\"E_PERM\"}"
generate_json(["foo" -> E_PERM], "common-subset")           ⇒   "{\"foo\":\"E_PERM\"}"
generate_json(["foo" -> E_PERM], "embedded-types")          ⇒   "{\"foo\":\"E_PERM|err\"}"

JSON keys must be strings, so regardless of the mode, the key will be converted to a string value.

generate_json([1 -> 2])                                     ⇒   "{\"1\":2}"
generate_json([1 -> 2], "common-subset")                    ⇒   "{\"1\":2}"
generate_json([1 -> 2], "embedded-types")                   ⇒   "{\"1|int\":2}"
generate_json([#1 -> 2], "embedded-types")                  ⇒   "{\"#1|obj\":2}"
Function: value parse_json (str json [, str mode])

Returns the MOO value representation of the JSON string. If the specified string is not valid JSON, E_INVARG is raised.

The optional mode specifies how this function handles conversion of MOO values into their JSON representation. The options are the same as for generate_json().

parse_json("{}")                                            ⇒   []
parse_json("{\"foo\":\"bar\"}")                             ⇒   ["foo" -> "bar"]
parse_json("{\"foo\":\"bar\"}", "common-subset")            ⇒   ["foo" -> "bar"]
parse_json("{\"foo\":\"bar\"}", "embedded-types")           ⇒   ["foo" -> "bar"]
parse_json("{\"foo\":1.1}")                                 ⇒   ["foo" -> 1.1]
parse_json("{\"foo\":1.1}", "common-subset")                ⇒   ["foo" -> 1.1]
parse_json("{\"foo\":1.1}", "embedded-types")               ⇒   ["foo" -> 1.1]
parse_json("{\"foo\":\"#1\"}")                              ⇒   ["foo" -> "#1"]
parse_json("{\"foo\":\"#1\"}", "common-subset")             ⇒   ["foo" -> "#1"]
parse_json("{\"foo\":\"#1|obj\"}", "embedded-types")        ⇒   ["foo" -> #1]
parse_json("{\"foo\":\"E_PERM\"}")                          ⇒   ["foo" -> "E_PERM"]
parse_json("{\"foo\":\"E_PERM\"}", "common-subset")         ⇒   ["foo" -> "E_PERM"]
parse_json("{\"foo\":\"E_PERM|err\"}", "embedded-types")    ⇒   ["foo" -> E_PERM]

In embedded types mode, key values can be converted to MOO types by appending type information. The full set of supported types are obj, str, err, float and int.

parse_json("{\"1\":2}")                                     ⇒   ["1" -> 2]
parse_json("{\"1\":2}", "common-subset")                    ⇒   ["1" -> 2]
parse_json("{\"1|int\":2}", "embedded-types")               ⇒   [1 -> 2]
parse_json("{\"#1|obj\":2}", "embedded-types")              ⇒   [#1 -> 2]

JSON defines types that MOO (currently) does not support, such as boolean true and false, and null. These values are always converted to the strings "true", "false" and "null".


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.2.2 Operations on Numbers

Function: int random ([int mod])

mod must be a positive integer; otherwise, E_INVARG is raised. An integer is chosen randomly from the range [1..mod] and returned. If mod is not provided, it defaults to the largest MOO integer, 2147483647.

Function: int random_bytes (int count)

Returns a binary string composed of between one and 10000 random bytes. count specifies the number of bytes and must be a positive integer; otherwise, E_INVARG is raised.

Function: num min (num x, …)
Function: num max (num x, …)

These two functions return the smallest or largest of their arguments, respectively. All of the arguments must be numbers of the same kind (i.e., either integer or floating-point); otherwise E_TYPE is raised.

Function: num abs (num x)

Returns the absolute value of x. If x is negative, then the result is -x; otherwise, the result is x. The number x can be either integer or floating-point; the result is of the same kind.

Function: str floatstr (float x, int precision [, scientific])

Converts x into a string with more control than provided by either tostr() or toliteral(). Precision is the number of digits to appear to the right of the decimal point, capped at 4 more than the maximum available precision, a total of 19 on most machines; this makes it possible to avoid rounding errors if the resulting string is subsequently read back as a floating-point value. If scientific is false or not provided, the result is a string in the form "MMMMMMM.DDDDDD", preceded by a minus sign if and only if x is negative. If scientific is provided and true, the result is a string in the form "M.DDDDDDe+EEE", again preceded by a minus sign if and only if x is negative.

Function: float sqrt (float x)

Returns the square root of x. Raises E_INVARG if x is negative.

Function: float sin (float x)
Function: float cos (float x)
Function: float tan (float x)

Returns the sine, cosine, or tangent of x, respectively.

Function: float asin (float x)
Function: float acos (float x)

Returns the arc-sine or arc-cosine (inverse sine or cosine) of x, in the range [-pi/2..pi/2] or [0..pi], respectively. Raises E_INVARG if x is outside the range [-1.0..1.0].

Function: float atan (float y [, float x])

Returns the arc-tangent (inverse tangent) of y in the range [-pi/2..pi/2] if x is not provided, or of y/x in the range [-pi..pi] if x is provided.

Function: float sinh (float x)
Function: float cosh (float x)
Function: float tanh (float x)

Returns the hyperbolic sine, cosine, or tangent of x, respectively.

Function: float exp (float x)

Returns e raised to the power of x.

Function: float log (float x)
Function: float log10 (float x)

Returns the natural or base 10 logarithm of x. Raises E_INVARG if x is not positive.

Function: float ceil (float x)

Returns the smallest integer not less than x, as a floating-point number.

Function: float floor (float x)

Returns the largest integer not greater than x, as a floating-point number.

Function: float trunc (float x)

Returns the integer obtained by truncating x at the decimal point, as a floating-point number. For negative x, this is equivalent to ceil(); otherwise it is equivalent to floor().


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.2.3 Operations on Strings

Function: int length (str string)

Returns the number of characters in string. It is also permissible to pass a list to length(); see the description in the next section.

length("foo")   ⇒   3
length("")      ⇒   0
Function: str strsub (str subject, str what, str with [, case-matters])

Replaces all occurrences in subject of what with with, performing string substitution. The occurrences are found from left to right and all substitutions happen simultaneously. By default, occurrences of what are searched for while ignoring the upper/lower case distinction. If case-matters is provided and true, then case is treated as significant in all comparisons.

strsub("%n is a fink.", "%n", "Fred")   ⇒   "Fred is a fink."
strsub("foobar", "OB", "b")             ⇒   "fobar"
strsub("foobar", "OB", "b", 1)          ⇒   "foobar"
Function: int index (str str1, str str2 [, case-matters [, skip]])
Function: int rindex (str str1, str str2 [, case-matters [, skip]])

The function index() (rindex()) returns the index of the first character of the first (last) occurrence of str2 in str1, or zero if str2 does not occur in str1 at all. By default the search for an occurrence of str2 is done while ignoring the upper/lower case distinction. If case-matters is provided and true, then case is treated as significant in all comparisons. By default the search starts at the beginning (end) of str1. If skip is provided, the search skips the first (last) skip characters and starts at an offset from the beginning (end) of str1. The skip must be a positive integer for index() and a negative integer for rindex(). The default value of skip is 0 (skip no characters).

index("foobar", "o")            ⇒   2
index("foobar", "o", 0, 0)      ⇒   2
index("foobar", "o", 0, 2)      ⇒   1
rindex("foobar", "o")           ⇒   3
rindex("foobar", "o", 0, 0)     ⇒   3
rindex("foobar", "o", 0, -4)    ⇒   2
index("foobar", "x")            ⇒   0
index("foobar", "oba")          ⇒   3
index("Foobar", "foo", 1)       ⇒   0
Function: int strtr (str source, str str1, str str2 [, case-matters])

Transforms the string source by replacing the characters specified by str1 with the corresponding characters specified by str2. All other characters are not transformed. If str2 has fewer characters than str1 the unmatched characters are simply removed from source. By default the transformation is done on both upper and lower case characters no matter the case. If case-matters is provided and true, then case is treated as significant.

strtr("foobar", "o", "i")           ⇒    "fiibar"
strtr("foobar", "ob", "bo")         ⇒    "fbboar"
strtr("foobar", "", "")             ⇒    "foobar"
strtr("foobar", "foba", "")         ⇒    "r"
strtr("5xX", "135x", "0aBB", 0)     ⇒    "BbB"
strtr("5xX", "135x", "0aBB", 1)     ⇒    "BBX"
strtr("xXxX", "xXxX", "1234", 0)    ⇒    "4444"
strtr("xXxX", "xXxX", "1234", 1)    ⇒    "3434"
Function: int strcmp (str str1, str str2)

Performs a case-sensitive comparison of the two argument strings. If str1 is lexicographically less than str2, the strcmp() returns a negative integer. If the two strings are identical, strcmp() returns zero. Otherwise, strcmp() returns a positive integer. The ASCII character ordering is used for the comparison.

Function: list decode_binary (str bin-string [, fully])

Returns a list of strings and/or integers representing the bytes in the binary string bin_string in order. If fully is false or omitted, the list contains an integer only for each non-printing, non-space byte; all other characters are grouped into the longest possible contiguous substrings. If fully is provided and true, the list contains only integers, one for each byte represented in bin_string. Raises E_INVARG if bin_string is not a properly-formed binary string. (See fine point on binary strings, for a full description of binary strings.)

decode_binary("foo")            ⇒   {"foo"}
decode_binary("foo~0D~0A")      ⇒   {"foo", 13, 10}
decode_binary("foo~0Abar~0A")   ⇒   {"foo", 10, "bar", 10}
decode_binary("foo~0D~0A", 1)   ⇒   {102, 111, 111, 13, 10}
Function: str encode_binary (arg, …)

Each argument must be an integer between 0 and 255, a string, or a list containing only legal arguments for this function. This function translates each integer and string in turn into its binary string equivalent, returning the concatenation of all these substrings into a single binary string. (See fine point on binary strings, for a full description of binary strings.)

encode_binary("~foo")                     ⇒   "~7Efoo"
encode_binary({"foo", 10}, {"bar", 13})   ⇒   "foo~0Abar~0D"
encode_binary("foo", 10, "bar", 13)       ⇒   "foo~0Abar~0D"
Function: str decode_base64 (str base64 [, safe])

Returns the binary string representation of the supplied Base64 encoded string argument. Raises E_INVARG if base64 is not a properly-formed Base64 string. If safe is provide and is true, a URL-safe version of Base64 is used (see RFC4648).

decode_base64("AAEC")      ⇒    "~00~01~02"
decode_base64("AAE", 1)    ⇒    "~00~01"
Function: str encode_base64 (str binary [, safe])

Returns the Base64 encoded string representation of the supplied binary string argument. Raises E_INVARG if binary is not a properly-formed binary string. If safe is provide and is true, a URL-safe version of Base64 is used (see RFC4648).

encode_base64("~00~01~02")    ⇒    "AAEC"
encode_base64("~00~01", 1)    ⇒    "AAE"
Function: list match (str subject, str pattern [, case-matters])
Function: list rmatch (str subject, str pattern [, case-matters])

The function match() (rmatch()) searches for the first (last) occurrence of the regular expression pattern in the string subject. If pattern is syntactically malformed, then E_INVARG is raised. The process of matching can in some cases consume a great deal of memory in the server; should this memory consumption become excessive, then the matching process is aborted and E_QUOTA is raised.

If no match is found, the empty list is returned; otherwise, these functions return a list containing information about the match (see below). By default, the search ignores upper-/lower-case distinctions. If case-matters is provided and true, then case is treated as significant in all comparisons.

The list that match() (rmatch()) returns contains the details about the match made. The list is in the form:

{start, end, replacements, subject}

where start is the index in subject of the beginning of the match, end is the index of the end of the match, replacements is a list described below, and subject is the same string that was given as the first argument to the match() or rmatch().

The replacements list is always nine items long, each item itself being a list of two integers, the start and end indices in string matched by some parenthesized sub-pattern of pattern. The first item in replacements carries the indices for the first parenthesized sub-pattern, the second item carries those for the second sub-pattern, and so on. If there are fewer than nine parenthesized sub-patterns in pattern, or if some sub-pattern was not used in the match, then the corresponding item in replacements is the list {0, -1}. See the discussion of ‘%)’, below, for more information on parenthesized sub-patterns.

match("foo", "^f*o$")        ⇒  {}
match("foo", "^fo*$")        ⇒  {1, 3, {{0, -1}, …}, "foo"}
match("foobar", "o*b")       ⇒  {2, 4, {{0, -1}, …}, "foobar"}
rmatch("foobar", "o*b")      ⇒  {4, 4, {{0, -1}, …}, "foobar"}
match("foobar", "f%(o*%)b")
        ⇒  {1, 4, {{2, 3}, {0, -1}, …}, "foobar"}

Regular expression matching allows you to test whether a string fits into a specific syntactic shape. You can also search a string for a substring that fits a pattern.

A regular expression describes a set of strings. The simplest case is one that describes a particular string; for example, the string ‘foo’ when regarded as a regular expression matches ‘foo’ and nothing else. Nontrivial regular expressions use certain special constructs so that they can match more than one string. For example, the regular expression ‘foo%|bar’ matches either the string ‘foo’ or the string ‘bar’; the regular expression ‘c[ad]*r’ matches any of the strings ‘cr’, ‘car’, ‘cdr’, ‘caar’, ‘cadddar’ and all other such strings with any number of ‘a’’s and ‘d’’s.

Regular expressions have a syntax in which a few characters are special constructs and the rest are ordinary. An ordinary character is a simple regular expression that matches that character and nothing else. The special characters are ‘$’, ‘^’, ‘.’, ‘*’, ‘+’, ‘?’, ‘[’, ‘]’ and ‘%’. Any other character appearing in a regular expression is ordinary, unless a ‘%’ precedes it.

For example, ‘f’ is not a special character, so it is ordinary, and therefore ‘f’ is a regular expression that matches the string ‘f’ and no other string. (It does not, for example, match the string ‘ff’.) Likewise, ‘o’ is a regular expression that matches only ‘o’.

Any two regular expressions a and b can be concatenated. The result is a regular expression which matches a string if a matches some amount of the beginning of that string and b matches the rest of the string.

As a simple example, we can concatenate the regular expressions ‘f’ and ‘o’ to get the regular expression ‘fo’, which matches only the string ‘fo’. Still trivial.

The following are the characters and character sequences that have special meaning within regular expressions. Any character not mentioned here is not special; it stands for exactly itself for the purposes of searching and matching.

.

is a special character that matches any single character. Using concatenation, we can make regular expressions like ‘a.b’, which matches any three-character string that begins with ‘a’ and ends with ‘b’.

*

is not a construct by itself; it is a suffix that means that the preceding regular expression is to be repeated as many times as possible. In ‘fo*’, the ‘*’ applies to the ‘o’, so ‘fo*’ matches ‘f’ followed by any number of ‘o’’s.

The case of zero ‘o’’s is allowed: ‘fo*’ does match ‘f’.

*’ always applies to the smallest possible preceding expression. Thus, ‘fo*’ has a repeating ‘o’, not a repeating ‘fo’.

The matcher processes a ‘*’ construct by matching, immediately, as many repetitions as can be found. Then it continues with the rest of the pattern. If that fails, it backtracks, discarding some of the matches of the ‘*’’d construct in case that makes it possible to match the rest of the pattern. For example, matching ‘c[ad]*ar’ against the string ‘caddaar’, the ‘[ad]*’ first matches ‘addaa’, but this does not allow the next ‘a’ in the pattern to match. So the last of the matches of ‘[ad]’ is undone and the following ‘a’ is tried again. Now it succeeds.

+

+’ is like ‘*’ except that at least one match for the preceding pattern is required for ‘+’. Thus, ‘c[ad]+r’ does not match ‘cr’ but does match anything else that ‘c[ad]*r’ would match.

?

?’ is like ‘*’ except that it allows either zero or one match for the preceding pattern. Thus, ‘c[ad]?r’ matches ‘cr’ or ‘car’ or ‘cdr’, and nothing else.

[ … ]

[’ begins a character set, which is terminated by a ‘]’. In the simplest case, the characters between the two brackets form the set. Thus, ‘[ad]’ matches either ‘a’ or ‘d’, and ‘[ad]*’ matches any string of ‘a’’s and ‘d’’s (including the empty string), from which it follows that ‘c[ad]*r’ matches ‘car’, etc.

Character ranges can also be included in a character set, by writing two characters with a ‘-’ between them. Thus, ‘[a-z]’ matches any lower-case letter. Ranges may be intermixed freely with individual characters, as in ‘[a-z$%.]’, which matches any lower case letter or ‘$’, ‘%’ or period.

Note that the usual special characters are not special any more inside a character set. A completely different set of special characters exists inside character sets: ‘]’, ‘-’ and ‘^’.

To include a ‘]’ in a character set, you must make it the first character. For example, ‘[]a]’ matches ‘]’ or ‘a’. To include a ‘-’, you must use it in a context where it cannot possibly indicate a range: that is, as the first character, or immediately after a range.

[^ … ]

[^’ begins a complement character set, which matches any character except the ones specified. Thus, ‘[^a-z0-9A-Z]’ matches all characters except letters and digits.

^’ is not special in a character set unless it is the first character. The character following the ‘^’ is treated as if it were first (it may be a ‘-’ or a ‘]’).

^

is a special character that matches the empty string – but only if at the beginning of the string being matched. Otherwise it fails to match anything. Thus, ‘^foo’ matches a ‘foo’ which occurs at the beginning of the string.

$

is similar to ‘^’ but matches only at the end of the string. Thus, ‘xx*$’ matches a string of one or more ‘x’’s at the end of the string.

%

has two functions: it quotes the above special characters (including ‘%’), and it introduces additional special constructs.

Because ‘%’ quotes special characters, ‘%$’ is a regular expression that matches only ‘$’, and ‘%[’ is a regular expression that matches only ‘[’, and so on.

For the most part, ‘%’ followed by any character matches only that character. However, there are several exceptions: characters that, when preceded by ‘%’, are special constructs. Such characters are always ordinary when encountered on their own.

No new special characters will ever be defined. All extensions to the regular expression syntax are made by defining new two-character constructs that begin with ‘%’.

%|

specifies an alternative. Two regular expressions a and b with ‘%|’ in between form an expression that matches anything that either a or b will match.

Thus, ‘foo%|bar’ matches either ‘foo’ or ‘bar’ but no other string.

%|’ applies to the largest possible surrounding expressions. Only a surrounding ‘%( … %)’ grouping can limit the grouping power of ‘%|’.

Full backtracking capability exists for when multiple ‘%|’’s are used.

%( … %)

is a grouping construct that serves three purposes:

  1. To enclose a set of ‘%|’ alternatives for other operations. Thus, ‘%(foo%|bar%)x’ matches either ‘foox’ or ‘barx’.
  2. To enclose a complicated expression for a following ‘*’, ‘+’, or ‘?’ to operate on. Thus, ‘ba%(na%)*’ matches ‘bananana’, etc., with any number of ‘na’’s, including none.
  3. To mark a matched substring for future reference.

This last application is not a consequence of the idea of a parenthetical grouping; it is a separate feature that happens to be assigned as a second meaning to the same ‘%( … %)’ construct because there is no conflict in practice between the two meanings. Here is an explanation of this feature:

%digit

After the end of a ‘%( … %)’ construct, the matcher remembers the beginning and end of the text matched by that construct. Then, later on in the regular expression, you can use ‘%’ followed by digit to mean “match the same text matched by the digit’th ‘%( … %)’ construct in the pattern.” The ‘%( … %)’ constructs are numbered in the order that their ‘%(’’s appear in the pattern.

The strings matching the first nine ‘%( … %)’ constructs appearing in a regular expression are assigned numbers 1 through 9 in order of their beginnings. ‘%1’ through ‘%9’ may be used to refer to the text matched by the corresponding ‘%( … %)’ construct.

For example, ‘%(.*%)%1’ matches any string that is composed of two identical halves. The ‘%(.*%)’ matches the first half, which may be anything, but the ‘%1’ that follows must match the same exact text.

%b

matches the empty string, but only if it is at the beginning or end of a word. Thus, ‘%bfoo%b’ matches any occurrence of ‘foo’ as a separate word. ‘%bball%(s%|%)%b’ matches ‘ball’ or ‘balls’ as a separate word.

For the purposes of this construct and the five that follow, a word is defined to be a sequence of letters and/or digits.

%B

matches the empty string, provided it is not at the beginning or end of a word.

%<

matches the empty string, but only if it is at the beginning of a word.

%>

matches the empty string, but only if it is at the end of a word.

%w

matches any word-constituent character (i.e., any letter or digit).

%W

matches any character that is not a word constituent.

Function: str substitute (str template, list subs)

Performs a standard set of substitutions on the string template, using the information contained in subs, returning the resulting, transformed template. Subs should be a list like those returned by match() or rmatch() when the match succeeds; otherwise, E_INVARG is raised.

In template, the strings ‘%1’ through ‘%9’ will be replaced by the text matched by the first through ninth parenthesized sub-patterns when match() or rmatch() was called. The string ‘%0’ in template will be replaced by the text matched by the pattern as a whole when match() or rmatch() was called. The string ‘%%’ will be replaced by a single ‘%’ sign. If ‘%’ appears in template followed by any other character, E_INVARG will be raised.

subs = match("*** Welcome to LambdaMOO!!!", "%(%w*%) to %(%w*%)");
substitute("I thank you for your %1 here in %2.", subs)
        ⇒   "I thank you for your Welcome here in LambdaMOO."
Function: str salt (str format, str input)

Generate a crypt() compatible salt string for the specified salt format using the specified binary random input. The specific set of formats supported depends on the libraries used to build the server, but will always include the standard salt format, indicated by the format string "" (the empty string), and the BCrypt salt format, indicated by the format string "$2a$NN$" (where "NN" is the work factor). Other possible formats include MD5 ("$1$"), SHA256 ("$5$") and SHA512 ("$6$"). Both the SHA256 and SHA512 formats support optional rounds.

salt("", ".M")                                           ⇒    "iB"
salt("$1$", "~183~1E~C6/~D1")                            ⇒    "$1$MAX54zGo"
salt("$5$", "x~F2~1Fv~ADj~92Y~9E~D4l~C3")                ⇒    "$5$s7z5qpeOGaZb"
salt("$5$rounds=2000$", "G~7E~A7~F5Q5~B7~0Aa~80T")       ⇒    "$5$rounds=2000$5trdp5JBreEM"
salt("$6$", "U7~EC!~E8~85~AB~CD~B5+~E1?")                ⇒    "$6$JR1vVUSVfqQhf2yD"
salt("$6$rounds=5000$", "~ED'~B0~BD~B9~DB^,\\~BD~E7")    ⇒    "$6$rounds=5000$hT0gxavqSl0L"
salt("$2a$08$", "|~99~86~DEq~94_~F3-~1A~D2#~8C~B5sx")    ⇒    "$2a$08$dHkE1lESV9KrErGhhJTxc."

Note: To ensure proper security, the random input must be from a sufficiently random source.

Function: str crypt (str text [, str salt])

Encrypts (hashes) the given text using the standard UNIX encryption method. If provided, salt should be a string at least two characters long, and it may dictate a specific algorithm to use. By default, crypt uses the original, now insecure, DES algorithm. Stunt specifically includes the BCrypt algorithm (identified by salts that start with "$2a$"), and may include MD5, SHA256, and SHA512 algorithms depending on the libraries used to build the server. The salt used is returned as the first part of the resulting encrypted string.

Aside from the possibly-random input in the salt, the encryption algorithms are entirely deterministic. In particular, you can test whether or not a given string is the same as the one used to produce a given piece of encrypted text; simply extract the salt from the front of the encrypted text and pass the candidate string and the salt to crypt(). If the result is identical to the given encrypted text, then you’ve got a match.

crypt("foobar", "iB")                               ⇒    "iBhNpg2tYbVjw"
crypt("foobar", "$1$MAX54zGo")                      ⇒    "$1$MAX54zGo$UKU7XRUEEiKlB.qScC1SX0"
crypt("foobar", "$5$s7z5qpeOGaZb")                  ⇒    "$5$s7z5qpeOGaZb$xkxjnDdRGlPaP7Z ... .pgk/pXcdLpeVCYh0uL9"
crypt("foobar", "$5$rounds=2000$5trdp5JBreEM")      ⇒    "$5$rounds=2000$5trdp5JBreEM$Imi ... ckZPoh7APC0Mo6nPeCZ3"
crypt("foobar", "$6$JR1vVUSVfqQhf2yD")              ⇒    "$6$JR1vVUSVfqQhf2yD$/4vyLFcuPTz ... qI0w8m8az076yMTdl0h."
crypt("foobar", "$6$rounds=5000$hT0gxavqSl0L")      ⇒    "$6$rounds=5000$hT0gxavqSl0L$9/Y ... zpCATppeiBaDxqIbAN7/"
crypt("foobar", "$2a$08$dHkE1lESV9KrErGhhJTxc.")    ⇒    "$2a$08$dHkE1lESV9KrErGhhJTxc.QnrW/bHp8mmBl5vxGVUcsbjo3gcKlf6"

Note: The specific set of supported algorithms depends on the libraries used to build the server. Only the BCrypt algorithm, which is distributed with the server source code, is guaranteed to exist. BCrypt is currently mature and well tested, and is recommended for new development.

Function: str string_hash (str text [, str algo [, binary]])
Function: str binary_hash (str bin-string [, str algo [, binary]])

Returns a string encoding the result of applying the SHA256 cryptographically secure hash function to the contents of the string text or the binary string bin-string. If algo is provided, it specifies the hashing algorithm to use. "MD5", "SHA1", "SHA224", "SHA256", "SHA384", "SHA512" and "RIPEMD160" are all supported. If binary is provided and true, the result is in MOO binary string format; by default the result is a hexidecimal string.

Note that the MD5 hash algorithm is broken from a cryptographic standpoint, as is SHA1. Both are included for interoperability with existing applications (both are still popular).

All supported hash functions have the property that, if

string_hash(x) == string_hash(y)

then, almost certainly,

equal(x, y)

This can be useful, for example, in certain networking applications: after sending a large piece of text across a connection, also send the result of applying string_hash() to the text; if the destination site also applies string_hash() to the text and gets the same result, you can be quite confident that the large text has arrived unchanged.

Function: str string_hmac (str text, str key [, str algo [, binary]])
Function: str binary_hmac (str bin-string, str key [, str algo [, binary]])

Returns a string encoding the result of applying the HMAC-SHA256 cryptographically secure HMAC function to the contents of the string text or the binary string bin-string with the specified secret key. If algo is provided, it specifies the hashing algorithm to use. Currently, only "SHA1" and "SHA256" are supported. If binary is provided and true, the result is in MOO binary string format; by default the result is a hexidecimal string.

All cryptographically secure HMACs have the property that, if

string_hmac(x, a) == string_hmac(y, b)

then, almost certainly,

equal(x, y)

and furthermore,

equal(a, b)

This can be useful, for example, in applications that need to verify both the integrity of the message (the text) and the authenticity of the sender (as demonstrated by the possession of the secret key).


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.2.4 Operations on Lists

Function: int length (list list)

Returns the number of elements in list. It is also permissible to pass a string to length(); see the description in the previous section.

length({1, 2, 3})   ⇒   3
length({})          ⇒   0
Function: int is_member (value, list list)

Returns true if there is an element of list that is completely indistinguishable from value. This is much the same operation as “value in list” except that, unlike in, the is_member() function does not treat upper- and lower-case characters in strings as equal.

"Foo" in {1, "foo", #24}            ⇒   2
is_member("Foo", {1, "foo", #24})   ⇒   0
is_member("Foo", {1, "Foo", #24})   ⇒   2
Function: list listinsert (list list, value [, int index])
Function: list listappend (list list, value [, int index])

These functions return a copy of list with value added as a new element. listinsert() and listappend() add value before and after (respectively) the existing element with the given index, if provided.

The following three expressions always have the same value:

listinsert(list, element, index)
listappend(list, element, index - 1)
{@list[1..index - 1], element, @list[index..length(list)]}

If index is not provided, then listappend() adds the value at the end of the list and listinsert() adds it at the beginning; this usage is discouraged, however, since the same intent can be more clearly expressed using the list-construction expression, as shown in the examples below.

x = {1, 2, 3};
listappend(x, 4, 2)   ⇒   {1, 2, 4, 3}
listinsert(x, 4, 2)   ⇒   {1, 4, 2, 3}
listappend(x, 4)      ⇒   {1, 2, 3, 4}
listinsert(x, 4)      ⇒   {4, 1, 2, 3}
{@x, 4}               ⇒   {1, 2, 3, 4}
{4, @x}               ⇒   {4, 1, 2, 3}
Function: list listdelete (list list, int index)

Returns a copy of list with the indexth element removed. If index is not in the range [1..length(list)], then E_RANGE is raised.

x = {"foo", "bar", "baz"};
listdelete(x, 2)   ⇒   {"foo", "baz"}
Function: list listset (list list, value, int index)

Returns a copy of list with the indexth element replaced by value. If index is not in the range [1..length(list)], then E_RANGE is raised.

x = {"foo", "bar", "baz"};
listset(x, "mumble", 2)   ⇒   {"foo", "mumble", "baz"}

This function exists primarily for historical reasons; it was used heavily before the server supported indexed assignments like x[i] = v. New code should always use indexed assignment instead of ‘listset()’ wherever possible.

Function: list setadd (list list, value)
Function: list setremove (list list, value)

Returns a copy of list with the given value added or removed, as appropriate. setadd() only adds value if it is not already an element of list; list is thus treated as a mathematical set. value is added at the end of the resulting list, if at all. Similarly, setremove() returns a list identical to list if value is not an element. If value appears more than once in list, only the first occurrence is removed in the returned copy.

setadd({1, 2, 3}, 3)         ⇒   {1, 2, 3}
setadd({1, 2, 3}, 4)         ⇒   {1, 2, 3, 4}
setremove({1, 2, 3}, 3)      ⇒   {1, 2}
setremove({1, 2, 3}, 4)      ⇒   {1, 2, 3}
setremove({1, 2, 3, 2}, 2)   ⇒   {1, 3, 2}

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.2.5 Operations on Maps

When using the functions below, it’s helpful to remember that maps are ordered.

Function: list mapkeys (map map)

Returns the keys of the elements of map.

x = ["foo" -> 1, "bar" -> 2, "baz" -> 3];
mapkeys(x)   ⇒   {"bar", "baz", "foo"}
Function: list mapvalues (map map)

Returns the values of the elements of map.

x = ["foo" -> 1, "bar" -> 2, "baz" -> 3];
mapvalues(x)   ⇒   {2, 3, 1}
Function: map mapdelete (map map, key)

Returns a copy of map with the value corresponding to key removed. If key is not a valid key, then E_RANGE is raised.

x = ["foo" -> 1, "bar" -> 2, "baz" -> 3];
mapdelete(x, "bar")   ⇒   ["baz" -> 3, "foo" -> 1]

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.3 Manipulating Objects

Objects are, of course, the main focus of most MOO programming and, largely due to that, there are a lot of built-in functions for manipulating them.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.3.1 Fundamental Operations on Objects

Function: obj create (list parents [, obj owner] [, int anon-flag] [, list init-args])
Function: obj create (obj parent [, obj owner] [, int anon-flag] [, list init-args])

Creates and returns a new object whose parents are parents (or whose parent is parent) and whose owner is as described below. If any of the given parents are not valid, or if the given parent is neither valid nor #-1, then E_INVARG is raised. The given parents objects must be valid and must be usable as a parent (i.e., their ‘a’ or ‘f’ bits must be true) or else the programmer must own parents or be a wizard; otherwise E_PERM is raised. Futhermore, if anon-flag is true then ‘a’ must be true; and, if anon-flag is false or not present, then ‘f’ must be true. Otherwise, E_PERM is raised unless the programmer owns parents or is a wizard. E_PERM is also raised if owner is provided and not the same as the programmer, unless the programmer is a wizard.

After the new object is created, its initialize verb, if any, is called. If init-args were given, they are passed as args to initialize.

If anon-flag is false or not present, the new object is a permanent object and is assigned the least non-negative object number that has not yet been used for a created object. Note that no object number is ever reused, even if the object with that number is recycled.

If anon-flag is true, the new object is an anonymous object and is not assigned an object number. Anonymous objects are automatically recycled when they are no longer used.

The owner of the new object is either the programmer (if owner is not provided), the new object itself (if owner was given and is invalid, or owner (otherwise).

The other built-in properties of the new object are initialized as follows:

name         ""
location     #-1
contents     {}
programmer   0
wizard       0
r            0
w            0
f            0

The function ‘is_player()’ returns false for newly created objects.

In addition, the new object inherits all of the other properties on its parents. These properties have the same permission bits as on the parents. If the ‘c’ permissions bit is set, then the owner of the property on the new object is the same as the owner of the new object itself; otherwise, the owner of the property on the new object is the same as that on the parent. The initial value of every inherited property is clear; see the description of the built-in function clear_property() for details.

If the intended owner of the new object has a property named ‘ownership_quota’ and the value of that property is an integer, then create() treats that value as a quota. If the quota is less than or equal to zero, then the quota is considered to be exhausted and create() raises E_QUOTA instead of creating an object. Otherwise, the quota is decremented and stored back into the ‘ownership_quota’ property as a part of the creation of the new object.

Function: none chparents (obj object, list new-parents)
Function: none chparent (obj object, obj new-parent)

Changes the parents of object to be new-parents. If object is not valid, or if any of the new-parents are neither valid nor equal to #-1, then E_INVARG is raised. If the programmer is neither a wizard or the owner of object, or if any of the new-parents are not fertile (i.e., the ‘f’ bit is not set) and the programmer is neither the owner of the object nor a wizard, then E_PERM is raised. If new-parents contains object or one of its current descendants, E_RECMOVE is raised. If object or one of its descendants defines a property with the same name as one defined on new-parents or on one of their ancestors, then E_INVARG is raised.

Changing an object’s parent can have the effect of removing some properties from and adding some other properties to that object and all of its descendants (i.e., its children and its children’s children, etc.). Let common be the nearest ancestor that object and new-parent have in common before the parent of object is changed. Then all properties defined by ancestors of object under common (that is, those ancestors of object that are in turn descendants of common) are removed from object and all of its descendants. All properties defined by new-parent or its ancestors under common are added to object and all of its descendants. As with create(), the newly-added properties are given the same permission bits as they have on new-parent, the owner of each added property is either the owner of the object it’s added to (if the ‘c’ permissions bit is set) or the owner of that property on new-parent, and the value of each added property is clear; see the description of the built-in function clear_property() for details. All properties that are not removed or added in the reparenting process are completely unchanged.

If new-parents is equal to {}, then object is given no parent at all; it becomes a new root of the parent/child hierarchy. In this case, all formerly inherited properties on object are simply removed.

Function: int valid (obj object)

Returns a non-zero integer (i.e., a true value) if object is a valid object (one that has been created and not yet recycled) and zero (i.e., a false value) otherwise.

valid(#0)    ⇒   1
valid(#-1)   ⇒   0
Function: list parents (obj object)
Function: obj parent (obj object)

These functions return the parents of object. If object is not valid, then E_INVARG is raised.

Function: list children (obj object)

This function returns a list of the children of object. If object is not valid, then E_INVARG is raised.

Function: none recycle (obj object)

The given object is destroyed, irrevocably. The programmer must either own object or be a wizard; otherwise, E_PERM is raised. If object is not valid, then E_INVARG is raised. The children of object are reparented to the parents of object. Before object is recycled, each object in its contents is moved to #-1 (implying a call to object’s exitfunc verb, if any) and then object’s ‘recycle’ verb, if any, is called with no arguments.

After object is recycled, if the owner of the former object has a property named ‘ownership_quota’ and the value of that property is a integer, then recycle() treats that value as a quota and increments it by one, storing the result back into the ‘ownership_quota’ property.

Function: int object_bytes (obj object)

Returns the number of bytes of the server’s memory required to store the given object, including the space used by the values of all of its non-clear properties and by the verbs and properties defined directly on the object. Raised E_INVARG if object is not a valid object and E_PERM if the programmer is not a wizard.

Function: obj max_object ()

Returns the largest object number yet assigned to a created object. Note that the object with this number may no longer exist; it may have been recycled. The next object created will be assigned the object number one larger than the value of max_object().


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.3.2 Object Movement

Function: none move (obj what, obj where)

Changes what’s location to be where. This is a complex process because a number of permissions checks and notifications must be performed. The actual movement takes place as described in the following paragraphs.

what should be a valid object and where should be either a valid object or #-1 (denoting a location of ‘nowhere’); otherwise E_INVARG is raised. The programmer must be either the owner of what or a wizard; otherwise, E_PERM is raised.

If where is a valid object, then the verb-call

where:accept(what)

is performed before any movement takes place. If the verb returns a false value and the programmer is not a wizard, then where is considered to have refused entrance to what; move() raises E_NACC. If where does not define an accept verb, then it is treated as if it defined one that always returned false.

If moving what into where would create a loop in the containment hierarchy (i.e., what would contain itself, even indirectly), then E_RECMOVE is raised instead.

The ‘location’ property of what is changed to be where, and the ‘contents’ properties of the old and new locations are modified appropriately. Let old-where be the location of what before it was moved. If old-where is a valid object, then the verb-call

old-where:exitfunc(what)

is performed and its result is ignored; it is not an error if old-where does not define a verb named ‘exitfunc’. Finally, if where and what are still valid objects, and where is still the location of what, then the verb-call

where:enterfunc(what)

is performed and its result is ignored; again, it is not an error if where does not define a verb named ‘enterfunc’.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.3.3 Operations on Properties

Function: list properties (obj object)

Returns a list of the names of the properties defined directly on the given object, not inherited from its parents. If object is not valid, then E_INVARG is raised. If the programmer does not have read permission on object, then E_PERM is raised.

Function: list property_info (obj object, str prop-name)
Function: none set_property_info (obj object, str prop-name, list info)

These two functions get and set (respectively) the owner and permission bits for the property named prop-name on the given object. If object is not valid, then E_INVARG is raised. If object has no non-built-in property named prop-name, then E_PROPNF is raised. If the programmer does not have read (write) permission on the property in question, then property_info() (set_property_info()) raises E_PERM. Property info has the following form:

{owner, perms [, new-name]}

where owner is an object, perms is a string containing only characters from the set ‘r’, ‘w’, and ‘c’, and new-name is a string; new-name is never part of the value returned by property_info(), but it may optionally be given as part of the value provided to set_property_info(). This list is the kind of value returned by property_info() and expected as the third argument to set_property_info(); the latter function raises E_INVARG if owner is not valid, if perms contains any illegal characters, or, when new-name is given, if prop-name is not defined directly on object or new-name names an existing property defined on object or any of its ancestors or descendants.

Function: none add_property (obj object, str prop-name, value, list info)

Defines a new property on the given object, inherited by all of its descendants; the property is named prop-name, its initial value is value, and its owner and initial permission bits are given by info in the same format as is returned by property_info(), described above. If object is not valid or info does not specify a valid owner and well-formed permission bits or object or its ancestors or descendants already defines a property named prop-name, then E_INVARG is raised. If the programmer does not have write permission on object or if the owner specified by info is not the programmer and the programmer is not a wizard, then E_PERM is raised.

Function: none delete_property (obj object, str prop-name)

Removes the property named prop-name from the given object and all of its descendants. If object is not valid, then E_INVARG is raised. If the programmer does not have write permission on object, then E_PERM is raised. If object does not directly define a property named prop-name (as opposed to inheriting one from its parents), then E_PROPNF is raised.

Function: int is_clear_property (obj object, str prop-name)
Function: none clear_property (obj object, str prop-name)

These two functions test for clear and set to clear, respectively, the property named prop-name on the given object. If object is not valid, then E_INVARG is raised. If object has no non-built-in property named prop-name, then E_PROPNF is raised. If the programmer does not have read (write) permission on the property in question, then is_clear_property() (clear_property()) raises E_PERM. If a property is clear, then when the value of that property is queried the value of the parents’ property of the same name is returned. If the parents’ property is clear, then the parent’s parent’s value is examined, and so on. If object is the definer of the property prop-name, as opposed to an inheritor of the property, then clear_property() raises E_INVARG.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.3.4 Operations on Verbs

Function: list verbs (obj object)

Returns a list of the names of the verbs defined directly on the given object, not inherited from its parents. If object is not valid, then E_INVARG is raised. If the programmer does not have read permission on object, then E_PERM is raised.

Most of the remaining operations on verbs accept a string containing the verb’s name to identify the verb in question. Because verbs can have multiple names and because an object can have multiple verbs with the same name, this practice can lead to difficulties. To most unambiguously refer to a particular verb, one can instead use a positive integer, the index of the verb in the list returned by verbs(), described above.

For example, suppose that verbs(#34) returns this list:

{"foo", "bar", "baz", "foo"}

Object #34 has two verbs named ‘foo’ defined on it (this may not be an error, if the two verbs have different command syntaxes). To refer unambiguously to the first one in the list, one uses the integer 1; to refer to the other one, one uses 4.

In the function descriptions below, an argument named verb-desc is either a string containing the name of a verb or else a positive integer giving the index of that verb in its defining object’s verbs() list.

For historical reasons, there is also a second, inferior mechanism for referring to verbs with numbers, but its use is strongly discouraged. If the property $server_options.support_numeric_verbname_strings exists with a true value, then functions on verbs will also accept a numeric string (e.g., "4") as a verb descriptor. The decimal integer in the string works more-or-less like the positive integers described above, but with two significant differences:

  1. The numeric string is a zero-based index into verbs(); that is, in the string case, you would use the number one less than what you would use in the positive integer case.
  2. When there exists a verb whose actual name looks like a decimal integer, this numeric-string notation is ambiguous; the server will in all cases assume that the reference is to the first verb in the list for which the given string could be a name, either in the normal sense or as a numeric index.

Clearly, this older mechanism is more difficult and risky to use; new code should only be written to use the current mechanism, and old code using numeric strings should be modified not to do so.

Function: list verb_info (obj object, str verb-desc)
Function: none set_verb_info (obj object, str verb-desc, list info)

These two functions get and set (respectively) the owner, permission bits, and name(s) for the verb as specified by verb-desc on the given object. If object is not valid, then E_INVARG is raised. If object does not define a verb as specified by verb-desc, then E_VERBNF is raised. If the programmer does not have read (write) permission on the verb in question, then verb_info() (set_verb_info()) raises E_PERM. Verb info has the following form:

{owner, perms, names}

where owner is an object, perms is a string containing only characters from the set ‘r’, ‘w’, ‘x’, and ‘d’, and names is a string. This is the kind of value returned by verb_info() and expected as the third argument to set_verb_info(). set_verb_info() raises E_INVARG if owner is not valid, if perms contains any illegal characters, or if names is the empty string or consists entirely of spaces; it raises E_PERM if owner is not the programmer and the programmer is not a wizard.

Function: list verb_args (obj object, str verb-desc)
Function: none set_verb_args (obj object, str verb-desc, list args)

These two functions get and set (respectively) the direct-object, preposition, and indirect-object specifications for the verb as specified by verb-desc on the given object. If object is not valid, then E_INVARG is raised. If object does not define a verb as specified by verb-desc, then E_VERBNF is raised. If the programmer does not have read (write) permission on the verb in question, then verb_args() (set_verb_args()) raises E_PERM. Verb args specifications have the following form:

{dobj, prep, iobj}

where dobj and iobj are strings drawn from the set "this", "none", and "any", and prep is a string that is either "none", "any", or one of the prepositional phrases listed much earlier in the description of verbs in the first chapter. This is the kind of value returned by verb_args() and expected as the third argument to set_verb_args(). Note that for set_verb_args(), prep must be only one of the prepositional phrases, not (as is shown in that table) a set of such phrases separated by ‘/’ characters. set_verb_args raises E_INVARG if any of the dobj, prep, or iobj strings is illegal.

verb_args($container, "take")
                    ⇒   {"any", "out of/from inside/from", "this"}
set_verb_args($container, "take", {"any", "from", "this"})
Function: int add_verb (obj object, list info, list args)

Defines a new verb on the given object. The new verb’s owner, permission bits and name(s) are given by info in the same format as is returned by verb_info(), described above. The new verb’s direct-object, preposition, and indirect-object specifications are given by args in the same format as is returned by verb_args, described above. The new verb initially has the empty program associated with it; this program does nothing but return an unspecified value.

If object is not valid, or info does not specify a valid owner and well-formed permission bits and verb names, or args is not a legitimate syntax specification, then E_INVARG is raised. If the programmer does not have write permission on object or if the owner specified by info is not the programmer and the programmer is not a wizard, then E_PERM is raised. Otherwise, this function returns a positive integer representing the new verb’s index in this object’s verbs() list.

Function: none delete_verb (obj object, str verb-desc)

Removes the verb as specified by verb-desc from the given object. If object is not valid, then E_INVARG is raised. If the programmer does not have write permission on object, then E_PERM is raised. If object does not define a verb as specified by verb-desc, then E_VERBNF is raised.

Function: list verb_code (obj object, str verb-desc [, fully-paren [, indent]])
Function: list set_verb_code (obj object, str verb-desc, list code)

These functions get and set (respectively) the MOO-code program associated with the verb as specified by verb-desc on object. The program is represented as a list of strings, one for each line of the program; this is the kind of value returned by verb_code() and expected as the third argument to set_verb_code(). For verb_code(), the expressions in the returned code are usually written with the minimum-necessary parenthesization; if full-paren is true, then all expressions are fully parenthesized. Also for verb_code(), the lines in the returned code are usually not indented at all; if indent is true, each line is indented to better show the nesting of statements.

If object is not valid, then E_INVARG is raised. If object does not define a verb as specified by verb-desc, then E_VERBNF is raised. If the programmer does not have read (write) permission on the verb in question, then verb_code() (set_verb_code()) raises E_PERM. If the programmer is not, in fact, a programmer, then E_PERM is raised.

For set_verb_code(), the result is a list of strings, the error messages generated by the MOO-code compiler during processing of code. If the list is non-empty, then set_verb_code() did not install code; the program associated with the verb in question is unchanged.

Function: list disassemble (obj object, str verb-desc)

Returns a (longish) list of strings giving a listing of the server’s internal “compiled” form of the verb as specified by verb-desc on object. This format is not documented and may indeed change from release to release, but some programmers may nonetheless find the output of disassemble() interesting to peruse as a way to gain a deeper appreciation of how the server works.

If object is not valid, then E_INVARG is raised. If object does not define a verb as specified by verb-desc, then E_VERBNF is raised. If the programmer does not have read permission on the verb in question, then disassemble() raises E_PERM.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.3.5 Operations on Player Objects

Function: list players ()

Returns a list of the object numbers of all player objects in the database.

Function: int is_player (obj object)

Returns a true value if the given object is a player object and a false value otherwise. If object is not valid, E_INVARG is raised.

Function: none set_player_flag (obj object, value)

Confers or removes the “player object” status of the given object, depending upon the truth value of value. If object is not valid, E_INVARG is raised. If the programmer is not a wizard, then E_PERM is raised.

If value is true, then object gains (or keeps) “player object” status: it will be an element of the list returned by players(), the expression is_player(object) will return true, and the server will treat a call to $do_login_command() that returns object as logging in the current connection.

If value is false, the object loses (or continues to lack) “player object” status: it will not be an element of the list returned by players(), the expression is_player(object) will return false, and users cannot connect to object by name when they log into the server. In addition, if a user is connected to object at the time that it loses “player object” status, then that connection is immediately broken, just as if boot_player(object) had been called (see the description of boot_player() below).


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.4 Operations on The Server Environment

Function: list exec (list command[, str input])

Asynchronously executes the specified external executable, optionally sending input. Returns the process return code, output and error. If the programmer is not a wizard, then E_PERM is raised.

The first argument must be a list of strings, or E_INVARG is raised. The first string is the path to the executable and is required. The rest are command line arguments passed to the executable.

The path to the executable may not start with a slash (/) or dot-dot (..), and it may not contain slash-dot (/.) or dot-slash (./), or E_INVARG is raised. If the specified executable does not exist or is not a regular file, E_INVARG is raised.

If the string input is present, it is written to standard input of the executing process.

When the process exits, it returns a list of the form:

{code, output, error}

code is the integer process exit status or return code. output and error are strings of data that were written to the standard output and error of the process.

The specified command is executed asynchronously. The function suspends the current task and allows other tasks to run until the command finishes. Tasks suspended this way can be killed with kill_task().

The strings, input, output and error are all MOO binary strings.

All external executables must reside in the executables directory.

exec({"cat", "-?"})                                   ⇒   {1, "", "cat: illegal option -- ?~0Ausage: cat [-benstuv] [file ...]~0A"}
exec({"cat"}, "foo")                                  ⇒   {0, "foo", ""}
exec({"echo", "one", "two"})                          ⇒   {0, "one two~0A", ""}
Function: str getenv (str name)

Returns the value of the named environment variable. If no such environment variable exists, 0 is returned. If the programmer is not a wizard, then E_PERM is raised.

getenv("HOME")                                          ⇒   "/home/foobar"
getenv("XYZZY")                                         ⇒   0

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.5 Operations on Network Connections

Function: list connected_players ([include-all])

Returns a list of the object numbers of those player objects with currently-active connections. If include-all is provided and true, then the list includes the object numbers associated with all current connections, including ones that are outbound and/or not yet logged-in.

Function: int connected_seconds (obj player)
Function: int idle_seconds (obj player)

These functions return the number of seconds that the currently-active connection to player has existed and been idle, respectively. If player is not the object number of a player object with a currently-active connection, then E_INVARG is raised.

Function: none notify (obj conn, str string [, no-flush])

Enqueues string for output (on a line by itself) on the connection conn. If the programmer is not conn or a wizard, then E_PERM is raised. If conn is not a currently-active connection, then this function does nothing. Output is normally written to connections only between tasks, not during execution.

The server will not queue an arbitrary amount of output for a connection; the MAX_QUEUED_OUTPUT compilation option (see section Server Compilation Options) controls the limit. When an attempt is made to enqueue output that would take the server over its limit, it first tries to write as much output as possible to the connection without having to wait for the other end. If that doesn’t result in the new output being able to fit in the queue, the server starts throwing away the oldest lines in the queue until the new ouput will fit. The server remembers how many lines of output it has ‘flushed’ in this way and, when next it can succeed in writing anything to the connection, it first writes a line like >> Network buffer overflow: X lines of output to you have been lost << where X is the number of flushed lines.

If no-flush is provided and true, then notify() never flushes any output from the queue; instead it immediately returns false. Notify() otherwise always returns true.

Function: int buffered_output_length ([obj conn])

Returns the number of bytes currently buffered for output to the connection conn. If conn is not provided, returns the maximum number of bytes that will be buffered up for output on any connection.

Function: str read ([obj conn [, non-blocking]])

Reads and returns a line of input from the connection conn (or, if not provided, from the player that typed the command that initiated the current task). If non-blocking is false or not provided, this function suspends the current task, resuming it when there is input available to be read. If non-blocking is provided and true, this function never suspends the calling task; if there is no input currently available for input, read() simply returns 0 immediately.

If conn is provided, then the programmer must either be a wizard or the owner of conn; if conn is not provided, then read() may only be called by a wizard and only in the task that was last spawned by a command from the connection in question. Otherwise, E_PERM is raised. If conn is not currently connected and has no pending lines of input, or if the connection is closed while a task is waiting for input but before any lines of input are received, then read() raises E_INVARG.

The restriction on the use of read() without any arguments preserves the following simple invariant: if input is being read from a player, it is for the task started by the last command that player typed. This invariant adds responsibility to the programmer, however. If your program calls another verb before doing a read(), then either that verb must not suspend or else you must arrange that no commands will be read from the connection in the meantime. The most straightforward way to do this is to call

set_connection_option(player, "hold-input", 1)

before any task suspension could happen, then make all of your calls to read() and other code that might suspend, and finally call

set_connection_option(player, "hold-input", 0)

to allow commands once again to be read and interpreted normally.

Function: map read_http (request-or-response [, obj conn])

Reads lines from the connection conn (or, if not provided, from the player that typed the command that initiated the current task) and attempts to parse the lines as if they are an HTTP request or response. request-or-response must be either the string "request" or "response". It dictates the type of parsing that will be done.

Just like read(), if conn is provided, then the programmer must either be a wizard or the owner of conn; if conn is not provided, then read_http() may only be called by a wizard and only in the task that was last spawned by a command from the connection in question. Otherwise, E_PERM is raised. Likewise, if conn is not currently connected and has no pending lines of input, or if the connection is closed while a task is waiting for input but before any lines of input are received, then read_http() raises E_INVARG.

If parsing fails because the request or response is syntactically incorrect, read_http() will return a map with the single key "error" and a list of values describing the reason for the error. If parsing succeeds, read_http() will return a map with an appropriate subset of the following keys, with values parsed from the HTTP request or response: "method", "uri", "headers", "body", "status" and "upgrade".

Fine point: read_http() assumes the input strings are binary strings. When called interactively, as in the example below, the programmer must insert the literal line terminators or parsing will fail.

The following example interactively reads an HTTP request from the player’s connection.

read_http("request", player)
GET /path HTTP/1.1~0D~0A
Host: example.com~0D~0A
~0D~0A

In this example, the string ~0D~0A ends the request. The call returns the following (the request has no body):

["headers" -> ["Host" -> "example.com"], "method" -> "GET", "uri" -> "/path"]

The following example interactively reads an HTTP response from the player’s connection.

read_http("response", player)
HTTP/1.1 200 Ok~0D~0A
Content-Length: 10~0D~0A
~0D~0A
1234567890

The call returns the following:

["body" -> "1234567890", "headers" -> ["Content-Length" -> "10"], "status" -> 200]
Function: none force_input (obj conn, str line [, at-front])

Inserts the string line as an input task in the queue for the connection conn, just as if it had arrived as input over the network. If at_front is provided and true, then the new line of input is put at the front of conn’s queue, so that it will be the very next line of input processed even if there is already some other input in that queue. Raises E_INVARG if conn does not specify a current connection and E_PERM if the programmer is neither conn nor a wizard.

Function: none flush_input (obj conn [show-messages])

Performs the same actions as if the connection conn’s defined flush command had been received on that connection, i.e., removes all pending lines of input from conn’s queue and, if show-messages is provided and true, prints a message to conn listing the flushed lines, if any. See the chapter on server assumptions about the database for more information about a connection’s defined flush command.

Function: list output_delimiters (obj player)

Returns a list of two strings, the current output prefix and output suffix for player. If player does not have an active network connection, then E_INVARG is raised. If either string is currently undefined, the value "" is used instead. See the discussion of the PREFIX and SUFFIX commands in the next chapter for more information about the output prefix and suffix.

Function: none boot_player (obj player)

Marks for disconnection any currently-active connection to the given player. The connection will not actually be closed until the currently-running task returns or suspends, but all MOO functions (such as notify(), connected_players(), and the like) immediately behave as if the connection no longer exists. If the programmer is not either a wizard or the same as player, then E_PERM is raised. If there is no currently-active connection to player, then this function does nothing.

If there was a currently-active connection, then the following verb call is made when the connection is actually closed:

$user_disconnected(player)

It is not an error if this verb does not exist; the call is simply skipped.

Function: str connection_name (obj player)

Returns a network-specific string identifying the connection being used by the given player. If the programmer is not a wizard and not player, then E_PERM is raised. If player is not currently connected, then E_INVARG is raised.

For the TCP/IP networking configurations, for in-bound connections, the string has the form

"port lport from host, port port"

where lport is the decimal TCP listening port on which the connection arrived, host is either the name or decimal TCP address of the host from which the player is connected, and port is the decimal TCP port of the connection on that host.

For outbound TCP/IP connections, the string has the form

"port lport to host, port port"

where lport is the decimal local TCP port number from which the connection originated, host is either the name or decimal TCP address of the host to which the connection was opened, and port is the decimal TCP port of the connection on that host.

For the System V ‘local’ networking configuration, the string is the UNIX login name of the connecting user or, if no such name can be found, something of the form

"User #number"

where number is a UNIX numeric user ID.

For the other networking configurations, the string is the same for all connections and, thus, useless.

Function: none set_connection_option (obj conn, str option, value)

Controls a number of optional behaviors associated the connection conn. Raises E_INVARG if conn does not specify a current connection and E_PERM if the programmer is neither conn nor a wizard. Unless otherwise specified below, options can only be set (value is true) or unset (otherwise). The following values for option are currently supported:

binary

When set, the connection is in binary mode, in which case both input from and output to conn can contain arbitrary bytes. Input from a connection in binary mode is not broken into lines at all; it is delivered to either the read() function or normal command parsing as binary strings, in whatever size chunks come back from the operating system. (See fine point on binary strings, for a description of the binary string representation.) For output to a connection in binary mode, the second argument to ‘notify()’ must be a binary string; if it is malformed, E_INVARG is raised.

Fine point: If the connection mode is changed at any time when there is pending input on the connection, said input will be delivered as per the previous mode (i.e., when switching out of binary mode, there may be pending “lines” containing tilde-escapes for embedded linebreaks, tabs, tildes and other characters; when switching into binary mode, there may be pending lines containing raw tabs and from which nonprintable characters have been silently dropped as per normal mode. Only during the initial invocation of $do_login_command() on an incoming connection or immediately after the call to open_network_connection() that creates an outgoing connection is there guaranteed not to be pending input. At other times you will probably want to flush any pending input immediately after changing the connection mode.

hold-input

When set, no input received on conn will be treated as a command; instead, all input remains in the queue until retrieved by calls to read() or until this connection option is unset, at which point command processing resumes. Processing of out-of-band input lines is unaffected by this option.

disable-oob

When set, disables all out of band processing (see section Out-of-Band Processing). All subsequent input lines until the next command that unsets this option will be made available for reading tasks or normal command parsing exactly as if the out-of-band prefix and the out-of-band quoting prefix had not been defined for this server.

client-echo

The setting of this option is of no significance to the server. However calling set_connection_option() for this option sends the Telnet Protocol ‘WONT ECHO’ or ‘WILL ECHO’ according as value is true or false, respectively. For clients that support the Telnet Protocol, this should toggle whether or not the client echoes locally the characters typed by the user. Note that the server itself never echoes input characters under any circumstances. (This option is only available under the TCP/IP networking configurations.)

flush-command

This option is string-valued. If the string is non-empty, then it is the flush command for this connection, by which the player can flush all queued input that has not yet been processed by the server. If the string is empty, then conn has no flush command at all. set_connection_option also allows specifying a non-string value which is equivalent to specifying the empty string. The default value of this option can be set via the property $server_options.default_flush_command; see Flushing Unprocessed Input for details.

intrinsic-commands

This option value is a list of strings, each being the name of one of the available server intrinsic commands (see section Command Lines That Receive Special Treatment). Commands not on the list are disabled, i.e., treated as normal MOO commands to be handled by $do_command and/or the built-in command parser

set_connection_option also allows specifying an integer value which, if zero, is equivalent to specifying the empty list, and otherwise is taken to be the list of all available intrinsic commands (the default setting).

Thus, one way to make the verbname ‘PREFIX’ available as an ordinary command is as follows:

  set_connection_option(
      player, "intrinsic-commands",
      setremove(connection_option(player,
                                  "intrinsic-commands"),
                "PREFIX"));

Note that connection_option() always returns the list, even if set_connection_option was previously called with a numeric value. Thus,

  save = connection_option(player,"intrinsic-commands");
  set_connection_option(player, "intrinsic-commands, 1);
  full_list = connection_option(player,"intrinsic-commands");
  set_connection_option(player,"intrinsic-commands", save);
  return full_list;

is a way of getting the full list of intrinsic commands available in the server while leaving the current connection unaffected.

Function: list connection_options (obj conn)

Returns a list of {name, value} pairs describing the current settings of all of the allowed options for the connection conn. Raises E_INVARG if conn does not specify a current connection and E_PERM if the programmer is neither conn nor a wizard.

Function: value connection_option (obj conn, str name)

Returns the current setting of the option name for the connection conn. Raises E_INVARG if conn does not specify a current connection and E_PERM if the programmer is neither conn nor a wizard.

Function: obj open_network_connection (value, … [, listener])

Establishes a network connection to the place specified by the arguments and more-or-less pretends that a new, normal player connection has been established from there. The new connection, as usual, will not be logged in initially and will have a negative object number associated with it for use with read(), notify(), and boot_player(). This object number is the value returned by this function.

If the programmer is not a wizard or if the OUTBOUND_NETWORK compilation option was not used in building the server, then E_PERM is raised. If the network connection cannot be made for some reason, then other errors will be returned, depending upon the particular network implementation in use.

For the TCP/IP network implementations (the only ones as of this writing that support outbound connections), there must be at least two arguments, a string naming a host (possibly using the numeric Internet syntax) and an integer specifying a TCP port. If a connection cannot be made because the host does not exist, the port does not exist, the host is not reachable or refused the connection, E_INVARG is raised. If the connection cannot be made for other reasons, including resource limitations, then E_QUOTA is raised.

Beginning with version 1.8.3, an optional third argument may be supplied, listener must be an object, whose listening verbs will be called at appropriate points. See the description in listen(), below, for more details.

The outbound connection process involves certain steps that can take quite a long time, during which the server is not doing anything else, including responding to user commands and executing MOO tasks. See the chapter on server assumptions about the database for details about how the server limits the amount of time it will wait for these steps to successfully complete.

It is worth mentioning one tricky point concerning the use of this function. Since the server treats the new connection pretty much like any normal player connection, it will naturally try to parse any input from that connection as commands in the usual way. To prevent this treatment, you should use set_connection_option() to set the hold-input option true on the connection.

Function: value listen (obj object, point [, print-messages])

Create a new point at which the server will listen for network connections, just as it does normally. object is the object whose verbs do_login_command, do_command, do_out_of_band_command, user_connected, user_created, user_reconnected, user_disconnected, and user_client_disconnected will be called at appropriate points, just as these verbs are called on #0 for normal connections. (See the chapter on server assumptions about the database for the complete story on when these functions are called.) point is a network-configuration-specific parameter describing the listening point. If print-messages is provided and true, then the various database-configurable messages (also detailed in the chapter on server assumptions) will be printed on connections received at the new listening point. listen() returns canon, a ‘canonicalized’ version of point, with any configuration-specific defaulting or aliasing accounted for.

This raises E_PERM if the programmer is not a wizard, E_INVARG if object is invalid or there is already a listening point described by point, and E_QUOTA if some network-configuration-specific error occurred.

For the TCP/IP configurations, point is a TCP port number on which to listen and canon is equal to point unless point is zero, in which case canon is a port number assigned by the operating system.

For the local multi-user configurations, point is the UNIX file name to be used as the connection point and canon is always equal to point.

In the single-user configuration, the can be only one listening point at a time; point can be any value at all and canon is always zero.

Function: none unlisten (canon)

Stop listening for connections on the point described by canon, which should be the second element of some element of the list returned by listeners(). Raises E_PERM if the programmer is not a wizard and E_INVARG if there does not exist a listener with that description.

Function: list listeners ()

Returns a list describing all existing listening points, including the default one set up automatically by the server when it was started (unless that one has since been destroyed by a call to unlisten()). Each element of the list has the following form:

{object, canon, print-messages}

where object is the first argument given in the call to listen() to create this listening point, print-messages is true if the third argument in that call was provided and true, and canon was the value returned by that call. (For the initial listening point, object is #0, canon is determined by the command-line arguments or a network-configuration-specific default, and print-messages is true.)

Please note that there is nothing special about the initial listening point created by the server when it starts; you can use unlisten() on it just as if it had been created by listen(). This can be useful; for example, under one of the TCP/IP configurations, you might start up your server on some obscure port, say 12345, connect to it by yourself for a while, and then open it up to normal users by evaluating the statments

unlisten(12345); listen(#0, 7777, 1)

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.6 Operations Involving Times and Dates

Function: int time ()

Returns the current time, represented as the number of seconds that have elapsed since midnight on 1 January 1970, Greenwich Mean Time.

Function: str ctime ([int time])

Interprets time as a time, using the same representation as given in the description of time(), above, and converts it into a 28-character, human-readable string in the following format:

Mon Aug 13 19:13:20 1990 PDT

If the current day of the month is less than 10, then an extra blank appears between the month and the day:

Mon Apr  1 14:10:43 1991 PST

If time is not provided, then the current time is used.

Note that ctime() interprets time for the local time zone of the computer on which the MOO server is running.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.7 MOO-Code Evaluation and Task Manipulation

Function: none raise (code [, str message [, value]])

Raises code as an error in the same way as other MOO expressions, statements, and functions do. Message, which defaults to the value of tostr(code), and value, which defaults to zero, are made available to any try-except statements that catch the error. If the error is not caught, then message will appear on the first line of the traceback printed to the user.

Function: value call_function (str func-name, arg, …)

Calls the built-in function named func-name, passing the given arguments, and returns whatever that function returns. Raises E_INVARG if func-name is not recognized as the name of a known built-in function. This allows you to compute the name of the function to call and, in particular, allows you to write a call to a built-in function that may or may not exist in the particular version of the server you’re using.

Function: list function_info ([str name])

Returns descriptions of the built-in functions available on the server. If name is provided, only the description of the function with that name is returned. If name is omitted, a list of descriptions is returned, one for each function available on the server. Raised E_INVARG if name is provided but no function with that name is available on the server.

Each function description is a list of the following form:

{name, min-args, max-args, types}

where name is the name of the built-in function, min-args is the minimum number of arguments that must be provided to the function, max-args is the maximum number of arguments that can be provided to the function or -1 if there is no maximum, and types is a list of max-args integers (or min-args if max-args is -1), each of which represents the type of argument required in the corresponding position. Each type number is as would be returned from the typeof() built-in function except that -1 indicates that any type of value is acceptable and -2 indicates that either integers or floating-point numbers may be given. For example, here are several entries from the list:

{"listdelete", 2, 2, {4, 0}}
{"suspend", 0, 1, {0}}
{"server_log", 1, 2, {2, -1}}
{"max", 1, -1, {-2}}
{"tostr", 0, -1, {}}

listdelete() takes exactly 2 arguments, of which the first must be a list (LIST == 4) and the second must be an integer (INT == 0). suspend() has one optional argument that, if provided, must be an integer. server_log() has one required argument that must be a string (STR == 2) and one optional argument that, if provided, may be of any type. max() requires at least one argument but can take any number above that, and the first argument must be either an integer or a floating-point number; the type(s) required for any other arguments can’t be determined from this description. Finally, tostr() takes any number of arguments at all, but it can’t be determined from this description which argument types would be acceptable in which positions.

Function: list eval (str string)

The MOO-code compiler processes string as if it were to be the program associated with some verb and, if no errors are found, that fictional verb is invoked. If the programmer is not, in fact, a programmer, then E_PERM is raised. The normal result of calling eval() is a two element list. The first element is true if there were no compilation errors and false otherwise. The second element is either the result returned from the fictional verb (if there were no compilation errors) or a list of the compiler’s error messages (otherwise).

When the fictional verb is invoked, the various built-in variables have values as shown below:

player    the same as in the calling verb
this      #-1
caller    the same as the initial value of this in the calling verb

args      {}
argstr    ""

verb      ""
dobjstr   ""
dobj      #-1
prepstr   ""
iobjstr   ""
iobj      #-1

The fictional verb runs with the permissions of the programmer and as if its ‘d’ permissions bit were on.

eval("return 3 + 4;")   ⇒   {1, 7}
Function: none set_task_perms (obj who)

Changes the permissions with which the currently-executing verb is running to be those of who. If the programmer is neither who nor a wizard, then E_PERM is raised.

Note: This does not change the owner of the currently-running verb, only the permissions of this particular invocation. It is used in verbs owned by wizards to make themselves run with lesser (usually non-wizard) permissions.

Function: obj caller_perms ()

Returns the permissions in use by the verb that called the currently-executing verb. If the currently-executing verb was not called by another verb (i.e., it is the first verb called in a command or server task), then caller_perms() returns #-1.

Function: int ticks_left ()
Function: int seconds_left ()

These two functions return the number of ticks or seconds (respectively) left to the current task before it will be forcibly terminated. These are useful, for example, in deciding when to call ‘suspend()’ to continue a long-lived computation.

Function: int task_id ()

Returns the non-zero, non-negative integer identifier for the currently-executing task. Such integers are randomly selected for each task and can therefore safely be used in circumstances where unpredictability is required.

Function: value suspend ([int seconds])

Suspends the current task, and resumes it after at least seconds seconds. (If seconds is not provided, the task is suspended indefinitely; such a task can only be resumed by use of the resume() function.) When the task is resumed, it will have a full quota of ticks and seconds. This function is useful for programs that run for a long time or require a lot of ticks. If seconds is negative, then E_INVARG is raised. Suspend() returns zero unless it was resumed via resume(), in which case it returns the second argument given to that function.

In some sense, this function forks the ‘rest’ of the executing task. However, there is a major difference between the use of ‘suspend(seconds)’ and the use of the ‘fork (seconds)’. The ‘fork’ statement creates a new task (a forked task) while the currently-running task still goes on to completion, but a suspend() suspends the currently-running task (thus making it into a suspended task). This difference may be best explained by the following examples, in which one verb calls another:

.program   #0:caller_A
#0.prop = 1;
#0:callee_A();
#0.prop = 2;
.

.program   #0:callee_A
fork(5)
  #0.prop = 3;
endfork
.

.program   #0:caller_B
#0.prop = 1;
#0:callee_B();
#0.prop = 2;
.

.program   #0:callee_B
suspend(5);
#0.prop = 3;
.

Consider #0:caller_A, which calls #0:callee_A. Such a task would assign 1 to #0.prop, call #0:callee_A, fork a new task, return to #0:caller_A, and assign 2 to #0.prop, ending this task. Five seconds later, if the forked task had not been killed, then it would begin to run; it would assign 3 to #0.prop and then stop. So, the final value of #0.prop (i.e., the value after more than 5 seconds) would be 3.

Now consider #0:caller_B, which calls #0:callee_B instead of #0:callee_A. This task would assign 1 to #0.prop, call #0:callee_B, and suspend. Five seconds later, if the suspended task had not been killed, then it would resume; it would assign 3 to #0.prop, return to #0:caller_B, and assign 2 to #0.prop, ending the task. So, the final value of #0.prop (i.e., the value after more than 5 seconds) would be 2.

A suspended task, like a forked task, can be described by the queued_tasks() function and killed by the kill_task() function. Suspending a task does not change its task id. A task can be suspended again and again by successive calls to suspend().

By default, there is no limit to the number of tasks any player may suspend, but such a limit can be imposed from within the database. See section Controlling the Execution of Tasks, for details.

Function: none resume (int task-id [, value])

Immediately ends the suspension of the suspended task with the given task-id; that task’s call to suspend() will return value, which defaults to zero. If value is of type ERR, it will be raised, rather than returned, in the suspended task. Resume() raises E_INVARG if task-id does not specify an existing suspended task and E_PERM if the programmer is neither a wizard nor the owner of the specified task.

Function: list queue_info ([obj player])

If player is omitted, returns a list of object numbers naming all players that currently have active task queues inside the server. If player is provided, returns the number of background tasks currently queued for that user. It is guaranteed that queue_info(X) will return zero for any X not in the result of queue_info().

Function: list queued_tasks ()

Returns information on each of the background tasks (i.e., forked, suspended or reading) owned by the programmer (or, if the programmer is a wizard, all queued tasks). The returned value is a list of lists, each of which encodes certain information about a particular queued task in the following format:

{task-id, start-time, x, y,
 programmer, verb-loc, verb-name, line, this,
 task-size}

where task-id is an integer identifier for this queued task, start-time is the time after which this task will begin execution (in time() format), x and y are obsolete values that are no longer interesting, programmer is the permissions with which this task will begin execution (and also the player who owns this task), verb-loc is the object on which the verb that forked this task was defined at the time, verb-name is that name of that verb, line is the number of the first line of the code in that verb that this task will execute, this is the value of the variable ‘this’ in that verb, and task-size is the size of the task in bytes. For reading tasks, start-time is -1.

The x and y fields are now obsolete and are retained only for backward-compatibility reasons. They may be reused for new purposes in some future version of the server.

The task-size variable was introduced in version 1.8.3.

Function: none kill_task (int task-id)

Removes the task with the given task-id from the queue of waiting tasks. If the programmer is not the owner of that task and not a wizard, then E_PERM is raised. If there is no task on the queue with the given task-id, then E_INVARG is raised.

Function: list callers ([include-line-numbers])

Returns information on each of the verbs and built-in functions currently waiting to resume execution in the current task. When one verb or function calls another verb or function, execution of the caller is temporarily suspended, pending the called verb or function returning a value. At any given time, there could be several such pending verbs and functions: the one that called the currently executing verb, the verb or function that called that one, and so on. The result of callers() is a list, each element of which gives information about one pending verb or function in the following format:

{this, verb-name, programmer, verb-loc, player, line-number}

For verbs, this is the initial value of the variable ‘this’ in that verb, verb-name is the name used to invoke that verb, programmer is the player with whose permissions that verb is running, verb-loc is the object on which that verb is defined, player is the initial value of the variable ‘player’ in that verb, and line-number indicates which line of the verb’s code is executing. The line-number element is included only if the include-line-numbers argument was provided and true.

For functions, this, programmer, and verb-loc are all #-1, verb-name is the name of the function, and line-number is an index used internally to determine the current state of the built-in function. The simplest correct test for a built-in function entry is

(VERB-LOC == #-1  &&  PROGRAMMER == #-1  &&  VERB-NAME != "")

The first element of the list returned by callers() gives information on the verb that called the currently-executing verb, the second element describes the verb that called that one, and so on. The last element of the list describes the first verb called in this task.

Function: list task_stack (int task-id [, include-line-numbers])

Returns information like that returned by the callers() function, but for the suspended task with the given task-id; the include-line-numbers argument has the same meaning as in callers(). Raises E_INVARG if task-id does not specify an existing suspended task and E_PERM if the programmer is neither a wizard nor the owner of the specified task.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.8 Administrative Operations

Function: none dump_database ()

Requests that the server checkpoint the database at its next opportunity. It is not normally necessary to call this function; the server automatically checkpoints the database at regular intervals; see the chapter on server assumptions about the database for details. If the programmer is not a wizard, then E_PERM is raised.

Function: int process_id ()

Returns the process id of the server.

Function: none shutdown ([str message])

Requests that the server shut itself down at its next opportunity. Before doing so, a notice (incorporating message, if provided) is printed to all connected players. If the programmer is not a wizard, then E_PERM is raised.

Function: none load_server_options ()

This causes the server to consult the current values of properties on $server_options, updating the corresponding server option settings (see section Server Options Set in the Database) accordingly. If the programmer is not a wizard, then E_PERM is raised.

Function: none server_log (str message [, level])

The text in message is sent to the server log with a distinctive prefix (so that it can be distinguished from server-generated messages). If the programmer is not a wizard, then E_PERM is raised. If level is provided and is an integer between 0 and 7 inclusive, then message is marked in the server log as one of eight predefined types, from simple log message to error message. Otherwise, if level is provided and true, then message is marked in the server log as an error.

Function: obj renumber (obj object)

The object number of the object currently numbered object is changed to be the least nonnegative object number not currently in use and the new object number is returned. If object is not valid, then E_INVARG is raised. If the programmer is not a wizard, then E_PERM is raised. If there are no unused nonnegative object numbers less than object, then object is returned and no changes take place.

The references to object in the parents/children and location/contents hierarchies are updated to use the new object number, and any verbs, properties and/or objects owned by object are also changed to be owned by the new object number. The latter operation can be quite time consuming if the database is large. No other changes to the database are performed; in particular, no object references in property values or verb code are updated.

This operation is intended for use in making new versions of the LambdaCore database from the then-current LambdaMOO database, and other similar situations. Its use requires great care.

Function: none reset_max_object ()

The server’s idea of the highest object number ever used is changed to be the highest object number of a currently-existing object, thus allowing reuse of any higher numbers that refer to now-recycled objects. If the programmer is not a wizard, then E_PERM is raised.

This operation is intended for use in making new versions of the LambdaCore database from the then-current LambdaMOO database, and other similar situations. Its use requires great care.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.4.9 Server Statistics and Miscellaneous Information

Function: str server_version ([with-details])

Returns a string giving the version number of the running MOO server. If with-details is provided and true, returns a detailed list including version number as well as compilation options.

Function: list memory_usage ()

Exists for backwards compatibility with old databases. Returns an empty list.

Function: int db_disk_size ()

Returns the total size, in bytes, of the most recent full representation of the database as one or more disk files. Raises E_QUOTA if, for some reason, no such on-disk representation is currently available.

Function: list verb_cache_stats ()
Function: none log_cache_stats ()

As of version 1.8.1, the server caches verbname-to-program lookups to improve performance. These functions respectively return or write to the server log file the current cache statistics. For verb_cache_stats the return value will be a list of the form

{hits, negative_hits, misses, table_clears, histogram},

though this may change in future server releases. The cache is invalidated by any builtin function call that may have an effect on verb lookups (e.g., delete_verb()).


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5 Server Commands and Database Assumptions

This chapter describes all of the commands that are built into the server and every property and verb in the database specifically accessed by the server. Aside from what is listed here, no assumptions are made by the server concerning the contents of the database.

We also describe some of the server configuration options that may affect how programs run.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1 Command Lines That Receive Special Treatment

As was mentioned in the chapter on command parsing, there are a number of commands and special prefixes whose interpretation is fixed by the server. Examples include the flush command and the five intrinsic commands (PREFIX, OUTPUTPREFIX, SUFFIX, OUTPUTSUFFIX, and .program).

This section discusses all of these built-in pieces of the command-interpretation process in the order in which they occur.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1.1 Flushing Unprocessed Input

It sometimes happens that a user changes their mind about having typed one or more lines of input and would like to ‘untype’ them before the server actually gets around to processing them. If they react quickly enough, they can type their connection’s defined flush command; when the server first reads that command from the network, it immediately and completely flushes any as-yet unprocessed input from that user, printing a message to the user describing just which lines of input were discarded, if any.

Fine point: The flush command is handled very early in the server’s processing of a line of input, before the line is entered into the task queue for the connection and well before it is parsed into words like other commands. For this reason, it must be typed exactly as it was defined, alone on the line, without quotation marks, and without any spaces before or after it.

When a connection is first accepted by the server, it is given an initial flush command setting taken from the current default. This initial setting can be changed later using the set_connection_option() command.

By default, each connection is initially given ‘.flush’ as its flush command. If the property $server_options.default_flush_command exists, then its value overrides this default. If $server_options.default_flush_command is a non-empty string, then that string is the flush command for all new connections; otherwise, new connections are initially given no flush command at all.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1.2 Out-of-Band Processing

It is possible to compile the server to recognize an out-of-band prefix and an out-of-band quoting prefix for input lines. These are strings that the server will check for at the beginning of every unflushed line of input from a non-binary connection, regardless of whether or not a player is logged in and regardless of whether or not reading tasks are waiting for input on that connection.

This check can be disabled entirely by setting connection option "disable-oob", in which case none of the rest of this section applies, i.e., all subsequent unflushed lines on that connection will be available unchanged for reading tasks or normal command parsing.

Quoted Lines

We first describe how to ensure that a given input line will not be processed as an out-of-band command.

If a given line of input begins with the defined out-of-band quoting prefix (‘#$"’ by default), that prefix is stripped. The resulting line is then available to reading tasks or normal command parsing in the usual way, even if said resulting line now happens to begin with either the out-of-band prefix or the out-of-band quoting prefix.

For example, if a player types

#$"#$#mcp-client-set-type fancy

the server would behave exactly as if connection option "disable-oob" were set true and the player had instead typed

#$#mcp-client-set-type fancy

Commands

If a given line of input begins with the defined out-of-band prefix (‘#$#’ by default), then it is not treated as a normal command or given as input to any reading task. Instead, the line is parsed into a list of words in the usual way and those words are given as the arguments in a call to $do_out_of_band_command().

If this verb does not exist or is not executable, the line in question will be completely ignored.

For example, with the default out-of-band prefix, the line of input

#$#mcp-client-set-type fancy

would result in the following call being made in a new server task:

$do_out_of_band_command("#$#mcp-client-set-type", "fancy")

During the call to $do_out_of_band_command(), the variable player is set to the object number representing the player associated with the connection from which the input line came. Of course, if that connection has not yet logged in, the object number will be negative. Also, the variable argstr will have as its value the unparsed input line as received on the network connection.

Out-of-band commands are intended for use by advanced client programs that may generate asynchronous events of which the server must be notified. Since the client cannot, in general, know the state of the player’s connection (logged-in or not, reading task or not), out-of-band commands provide the only reliable client-to-server communications channel.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1.3 Initial Punctuation in Commands

The server interprets command lines that begin with any of the following characters specially:

"        :        ;

Before processing the command, the initial punctuation character is replaced by the corresponding word below, followed by a space:

say      emote    eval

For example, the command line

"Hello, there.

is transformed into

say Hello, there.

before parsing.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1.4 Command-Output Delimiters

Warning: This is a deprecated feature.

Every MOO network connection has associated with it two strings, the output prefix and the output suffix. Just before executing a command typed on that connection, the server prints the output prefix, if any, to the player. Similarly, just after finishing the command, the output suffix, if any, is printed to the player. Initially, these strings are not defined, so no extra printing takes place.

The PREFIX and SUFFIX commands are used to set and clear these strings. They have the following simple syntax:

PREFIX  output-prefix
SUFFIX  output-suffix

That is, all text after the command name and any following spaces is used as the new value of the appropriate string. If there is no non-blank text after the command string, then the corresponding string is cleared. For compatibility with some general MUD client programs, the server also recognizes OUTPUTPREFIX as a synonym for PREFIX and OUTPUTSUFFIX as a synonym for SUFFIX.

These commands are intended for use by programs connected to the MOO, so that they can issue MOO commands and (somewhat) reliably determine the beginning and end of the resulting output. For example, one editor-based client program sends this sequence of commands on occasion:

PREFIX >>MOO-Prefix<<
SUFFIX >>MOO-Suffix<<
@list object:verb without numbers
PREFIX
SUFFIX

The effect of which, in a LambdaCore-derived database, is to print out the code for the named verb preceded by a line containing only ‘>>MOO-Prefix<<’ and followed by a line containing only ‘>>MOO-Suffix<<’. This enables the editor to (somewhat) reliably extract the program text from the MOO output and show it to the user in a separate editor window. There are many other possible uses.

Warning: If the command thus bracketed calls suspend(), its output will be deemed “finished” then and there; the suffix thus appears at that point and not, as one might expect, later when the resulting background task has finally returned from its top-level verb call. Thus, use of this feature (which was designed before suspend() existed) is no longer recommended.

The built-in function output_delimiters() can be used by MOO code to find out the output prefix and suffix currently in effect on a particular network connection.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1.5 The .program Command

The .program command is a common way for programmers to associate a particular MOO-code program with a particular verb. It has the following syntax:

.program object:verblines of MOO code…
.

That is, after typing the .program command, then all lines of input from the player are considered to be a part of the MOO program being defined. This ends as soon as the player types a line containing only a dot (‘.’). When that line is received, the accumulated MOO program is checked for proper MOO syntax and, if correct, associated with the named verb.

Fine point: The lines are entered verbatim; no “dot-unquoting” is performed. That is, the translation often performed in other similar contexts (e.g., LambdaCore’s $prog:@program verb or other LambdaCore commands that make use of $command_utils:read_lines()) in which a line beginning with two dots (‘..’) will have the first dot stripped before being included, does not occur here.

If, at the time the line containing only a dot is processed, (a) the player is not a programmer, (b) the player does not have write permission on the named verb, or (c) the property $server_options.protect_set_verb_code exists and has a true value and the player is not a wizard, then an error message is printed and the named verb’s program is not changed.

In the .program command, object may have one of three forms:


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2 Server Assumptions About the Database

There are a small number of circumstances under which the server directly and specifically accesses a particular verb or property in the database. This section gives a complete list of such circumstances.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.1 Server Options Set in the Database

Many optional behaviors of the server can be controlled from within the database by creating the property $server_options (i.e., #0.server_options), assigning as its value a valid object number, and then defining various properties on that object. At a number of times, the server checks for whether the property $server_options exists and has an object number as its value. If so, then the server looks for a variety of other properties on that $server_options object and, if they exist, uses their values to control how the server operates.

The specific properties searched for are each described in the appropriate section below, but here is a brief list of all of the relevant properties for ease of reference:

bg_seconds

The number of seconds allotted to background tasks.

bg_ticks

The number of ticks allotted to background tasks.

connect_timeout

The maximum number of seconds to allow an un-logged-in in-bound connection to remain open.

default_flush_command

The initial setting of each new connection’s flush command.

fg_seconds

The number of seconds allotted to foreground tasks.

fg_ticks

The number of ticks allotted to foreground tasks.

max_stack_depth

The maximum number of levels of nested verb calls.

name_lookup_timeout

The maximum number of seconds to wait for a network hostname/address lookup.

outbound_connect_timeout

The maximum number of seconds to wait for an outbound network connection to successfully open.

protect_property

Restrict reading of built-in property to wizards.

protect_function

Restrict use of built-in function to wizards.

queued_task_limit

The maximum number of forked or suspended tasks any player can have queued at a given time

support_numeric_verbname_strings

Enables use of an obsolete verb-naming mechanism.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.2 Server Messages Set in the Database

There are a number of circumstances under which the server itself generates messages on network connections. Most of these can be customized or even eliminated from within the database. In each such case, a property on $server_options is checked at the time the message would be printed. If the property does not exist, a default message is printed. If the property exists and its value is not a string or a list containing strings, then no message is printed at all. Otherwise, the string(s) are printed in place of the default message, one string per line. None of these messages are ever printed on an outbound network connection created by the function open_network_connection().

The following list covers all of the customizable messages, showing for each the name of the relevant property on $server_options, the default message, and the circumstances under which the message is printed:

boot_msg = "*** Disconnected ***"

The function boot_player() was called on this connection.

connect_msg = "*** Connected ***"

The user object that just logged in on this connection existed before $do_login_command() was called.

create_msg = "*** Created ***"

The user object that just logged in on this connection did not exist before $do_login_command() was called.

recycle_msg = "*** Recycled ***"

The logged-in user of this connection has been recycled or renumbered (via the renumber() function).

redirect_from_msg = "*** Redirecting connection to new port ***"

The logged-in user of this connection has just logged in on some other connection.

redirect_to_msg = "*** Redirecting old connection to this port ***"

The user who just logged in on this connection was already logged in on some other connection.

server_full_msg = {

"*** Sorry, but the server cannot accept any more connections right now.",
"*** Please try again later."}

This connection arrived when the server really couldn’t accept any more connections, due to running out of a critical operating system resource.

timeout_msg = "*** Timed-out waiting for login. ***"

This in-bound network connection was idle and un-logged-in for too long. The actual time limit is $server_options.connect_timeout.

Fine point: If the network connection in question was received at a listening point (established by the ‘listen()’ function) handled by an object obj other than #0, then system messages for that connection are looked for on obj.server_options; if that property does not exist, then $server_options is used instead.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.3 Checkpointing the Database

The server maintains the entire MOO database in main memory, not on disk. It is therefore necessary for it to dump the database to disk if it is to persist beyond the lifetime of any particular server execution. The server is careful to dump the database just before shutting down, of course, but it is also prudent for it to do so at regular intervals, just in case something untoward happens.

To determine how often to make these checkpoints of the database, the server consults the value of $dump_interval. If it exists and its value is an integer greater than or equal to 60, then it is taken as the number of seconds to wait between checkpoints; otherwise, the server makes a new checkpoint every 3600 seconds (one hour). If the value of $dump_interval implies that the next checkpoint should be scheduled at a time after 3:14:07 a.m. on Tuesday, January 19, 2038, then the server instead uses the default value of 3600 seconds in the future.

The decision about how long to wait between checkpoints is made again immediately after each one begins. Thus, changes to $dump_interval will take effect after the next checkpoint happens.

Whenever the server begins to make a checkpoint, it makes the following verb call:

$checkpoint_started()

When the checkpointing process is complete, the server makes the following verb call:

$checkpoint_finished(success)

where success is true if and only if the checkpoint was successfully written on the disk. Checkpointing can fail for a number of reasons, usually due to exhaustion of various operating system resources such as virtual memory or disk space. It is not an error if either of these verbs does not exist; the corresponding call is simply skipped.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.4 Accepting and Initiating Network Connections

When the server first accepts a new, incoming network connection, it is given the low-level network address of computer on the other end. It immediately attempts to convert this address into the human-readable host name that will be entered in the server log and returned by the connection_name() function. This conversion can, for the TCP/IP networking configurations, involve a certain amount of communication with remote name servers, which can take quite a long time and/or fail entirely. While the server is doing this conversion, it is not doing anything else at all; in particular, it it not responding to user commands or executing MOO tasks.

By default, the server will wait no more than 5 seconds for such a name lookup to succeed; after that, it behaves as if the conversion had failed, using instead a printable representation of the low-level address. If the property name_lookup_timeout exists on $server_options and has an integer as its value, that integer is used instead as the timeout interval.

When the open_network_connection() function is used, the server must again do a conversion, this time from the host name given as an argument into the low-level address necessary for actually opening the connection. This conversion is subject to the same timeout as in the in-bound case; if the conversion does not succeed before the timeout expires, the connection attempt is aborted and open_network_connection() raises E_QUOTA.

After a successful conversion, though, the server must still wait for the actual connection to be accepted by the remote computer. As before, this can take a long time during which the server is again doing nothing else. Also as before, the server will by default wait no more than 5 seconds for the connection attempt to succeed; if the timeout expires, open_network_connection() again raises E_QUOTA. This default timeout interval can also be overridden from within the database, by defining the property outbound_connect_timeout on $server_options with an integer as its value.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.5 Associating Network Connections with Players

When a network connection is first made to the MOO, it is identified by a unique, negative object number. Such a connection is said to be un-logged-in and is not yet associated with any MOO player object.

Each line of input on an un-logged-in connection that is not a flush command and is not consumed by out-of-band processing is parsed into words in the usual way (see the chapter on command parsing for details) and then these words are passed as the arguments in a call to the verb $do_login_command(). For example, the input line

connect Munchkin frebblebit

would result in the following call being made:

$do_login_command("connect", "Munchkin", "frebblebit")

In that call, the variable player will have as its value the negative object number associated with the appropriate network connection. The functions notify() and boot_player() can be used with such object numbers to send output to and disconnect un-logged-in connections. Also, the variable argstr will have as its value the unparsed command line as received on the network connection.

If $do_login_command() returns a valid player object and the connection is still open, then the connection is considered to have logged into that player. The server then makes one of the following verbs calls, depending on the player object that was returned:

$user_created(player)
$user_connected(player)
$user_reconnected(player)

The first of these is used if the returned object number is greater than the value returned by the max_object() function before $do_login_command() was invoked, that is, it is called if the returned object appears to have been freshly created. If this is not the case, then one of the other two verb calls is used. The $user_connected() call is used if there was no existing active connection for the returned player object. Otherwise, the $user_reconnected() call is used instead.

Fine point: If a user reconnects and the user’s old and new connections are on two different listening points being handled by different objects (see the description of the listen() function for more details), then user_client_disconnected is called for the old connection and user_connected for the new one.

If an in-bound network connection does not successfully log in within a certain period of time, the server will automatically shut down the connection, thereby freeing up the resources associated with maintaining it. Let L be the object handling the listening point on which the connection was received (or #0 if the connection came in on the initial listening point). To discover the timeout period, the server checks on L.server_options or, if it doesn’t exist, on $server_options for a connect_timeout property. If one is found and its value is a positive integer, then that’s the number of seconds the server will use for the timeout period. If the connect_timeout property exists but its value isn’t a positive integer, then there is no timeout at all. If the property doesn’t exist, then the default timeout is 300 seconds.

When any network connection (even an un-logged-in or outbound one) is terminated, by either the server or the client, then one of the following two verb calls is made:

$user_disconnected(player)
$user_client_disconnected(player)

The first is used if the disconnection is due to actions taken by the server (e.g., a use of the boot_player() function or the un-logged-in timeout described above) and the second if the disconnection was initiated by the client side.

It is not an error if any of these five verbs do not exist; the corresponding call is simply skipped.

Note: Only one network connection can be controlling a given player object at a given time; should a second connection attempt to log in as that player, the first connection is unceremoniously closed (and $user_reconnected() called, as described above). This makes it easy to recover from various kinds of network problems that leave connections open but inaccessible.

When the network connection is first established, the null command is automatically entered by the server, resulting in an initial call to $do_login_command() with no arguments. This signal can be used by the verb to print out a welcome message, for example.

Warning: If there is no $do_login_command() verb defined, then lines of input from un-logged-in connections are simply discarded. Thus, it is necessary for any database to include a suitable definition for this verb.

Note that a database with a missing or broken $do_login_command may still be accessed (and perhaps repaired) by running the server with the -e command line option. See section Emergency Wizard Mode.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.6 Player Input Handlers

$do_out_of_band_command

On any connection for which the connection-option disable-oob has not been set, any unflushed incoming lines that begin with the out-of-band prefix will be treated as out-of-band commands, meaning that if the verb $do_out_of_band_command() exists and is executable, it will be called for each such line. For more on this, see Out-of-band Processing.

$do_command

As we previously described in The Built-in Command Parser, on any logged-in connection that

any incoming line that

will result in a call to $do_command() provided that verb exists and is executable. If this verb suspends or returns a true value, then processing of that line ends at this point, otherwise, whether the verb returned false or did not exist in the first place, the remainder of the builtin parsing process is invoked.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.7 The First Tasks Run By the Server

Whenever the server is booted, there are a few tasks it runs right at the beginning, before accepting connections or getting the value of $dump_interval to schedule the first checkpoint (see below for more information on checkpoint scheduling).

First, the server calls $do_start_script() and passes in script content via the args built-in variable. The script content is specified on the command line when the server is started. The server can call this verb multiple times, once each for the -c and -f command line arguments.

Next, the server calls $user_disconnected() once for each user who was connected at the time the database file was written; this allows for any cleaning up that’s usually done when users disconnect (e.g., moving their player objects back to some ‘home’ location, etc.).

Next, it checks for the existence of the verb $server_started(). If there is such a verb, then the server runs a task invoking that verb with no arguments and with player equal to #-1. This is useful for carefully scheduling checkpoints and for re-initializing any state that is not properly represented in the database file (e.g., re-opening certain outbound network connections, clearing out certain tables, etc.).


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.8 Controlling the Execution of Tasks

As described earlier, in the section describing MOO tasks, the server places limits on the number of seconds for which any task may run continuously and the number of “ticks,” or low-level operations, any task may execute in one unbroken period. By default, foreground tasks may use 60,000 ticks and five seconds, and background tasks may use 30,000 ticks and three seconds. These defaults can be overridden from within the database by defining any or all of the following properties on $server_options and giving them integer values:

bg_seconds

The number of seconds allotted to background tasks.

bg_ticks

The number of ticks allotted to background tasks.

fg_seconds

The number of seconds allotted to foreground tasks.

fg_ticks

The number of ticks allotted to foreground tasks.

The server ignores the values of fg_ticks and bg_ticks if they are less than 100 and similarly ignores fg_seconds and bg_seconds if their values are less than 1. This may help prevent utter disaster should you accidentally give them uselessly-small values.

Recall that command tasks and server tasks are deemed foreground tasks, while forked, suspended, and reading tasks are defined as background tasks. The settings of these variables take effect only at the beginning of execution or upon resumption of execution after suspending or reading.

The server also places a limit on the number of levels of nested verb calls, raising E_MAXREC from a verb-call expression if the limit is exceeded. The limit is 50 levels by default, but this can be increased from within the database by defining the max_stack_depth property on $server_options and giving it an integer value greater than 50. The maximum stack depth for any task is set at the time that task is created and cannot be changed thereafter. This implies that suspended tasks, even after being saved in and restored from the DB, are not affected by later changes to $server_options.max_stack_depth.

Finally, the server can place a limit on the number of forked or suspended tasks any player can have queued at a given time. Each time a fork statement or a call to suspend() is executed in some verb, the server checks for a property named queued_task_limit on the programmer. If that property exists and its value is a non-negative integer, then that integer is the limit. Otherwise, if $server_options.queued_task_limit exists and its value is a non-negative integer, then that’s the limit. Otherwise, there is no limit. If the programmer already has a number of queued tasks that is greater than or equal to the limit, E_QUOTA is raised instead of either forking or suspending. Reading tasks are affected by the queued-task limit.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.9 Controlling the Handling of Aborted Tasks

The server will abort the execution of tasks for either of two reasons:

  1. an error was raised within the task but not caught, or
  2. the task exceeded the limits on ticks and/or seconds.

In each case, after aborting the task, the server attempts to call a particular handler verb within the database to allow code there to handle this mishap in some appropriate way. If this verb call suspends or returns a true value, then it is considered to have handled the situation completely and no further processing will be done by the server. On the other hand, if the handler verb does not exist, or if the call either returns a false value without suspending or itself is aborted, the server takes matters into its own hands.

First, an error message and a MOO verb-call stack traceback are printed to the player who typed the command that created the original aborted task, explaining why the task was aborted and where in the task the problem occurred. Then, if the call to the handler verb was itself aborted, a second error message and traceback are printed, describing that problem as well. Note that if the handler-verb call itself is aborted, no further ‘nested’ handler calls are made; this policy prevents what might otherwise be quite a vicious little cycle.

The specific handler verb, and the set of arguments it is passed, differs for the two causes of aborted tasks.

If an error is raised and not caught, then the verb-call

$handle_uncaught_error(code, msg, value, traceback, formatted)

is made, where code, msg, value, and traceback are the values that would have been passed to a handler in a try-except statement and formatted is a list of strings being the lines of error and traceback output that will be printed to the player if $handle_uncaught_error returns false without suspending.

If a task runs out of ticks or seconds, then the verb-call

$handle_task_timeout(resource, traceback, formatted)

is made, where resource is the appropriate one of the strings "ticks" or "seconds", and traceback and formatted are as above.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.10 Matching in Command Parsing

In the process of matching the direct and indirect object strings in a command to actual objects, the server uses the value of the aliases property, if any, on each object in the contents of the player and the player’s location. For complete details, see the chapter on command parsing.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.11 Restricting Access to Built-in Properties and Functions

Protected Properties

A built-in property prop is deemed protected if $server_options.protect_prop exists and has a true value. However, no such property protections are recognized if the compilation option IGNORE_PROP_PROTECTED (see section Server Compilation Options) was set when building the server. (It should be noted that enabling property protection has significant performance costs).

Whenever verb code attempts to read (on any object) the value of a built-in property that is protected in this way, the server raises E_PERM if the programmer is not a wizard.

Protected Built-in Functions

A built-in function func() is deemed protected if $server_options.protect_func exists and has a true value. If, for a given protected built-in function, a corresponding verb $bf_func() exists and its ‘x’ bit is set, then that built-in function is also considered overridden, meaning that any call to func() from any object other than #0 will be treated as a call to $bf_func() with the same arguments, returning or raising whatever that verb returns or raises.

A call to a protected built-in function that is not overridden proceeds normally as long as either the caller is #0 or has wizard permissions; otherwise the server raises E_PERM.

Note that you must call load_server_options() in order to ensure that changes made in $server_options take effect.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.12 Creating and Recycling Objects

Whenever the create() function is used to create a new object, that object’s initialize verb, if any, is called with no arguments. The call is simply skipped if no such verb is defined on the object.

Symmetrically, just before the recycle() function actually destroys an object, the object’s recycle verb, if any, is called with no arguments. Again, the call is simply skipped if no such verb is defined on the object.

Both create() and recycle() check for the existence of an ownership_quota property on the owner of the newly-created or -destroyed object. If such a property exists and its value is an integer, then it is treated as a quota on object ownership. Otherwise, the following two paragraphs do not apply.

The create() function checks whether or not the quota is positive; if so, it is reduced by one and stored back into the ownership_quota property on the owner. If the quota is zero or negative, the quota is considered to be exhausted and create() raises E_QUOTA.

The recycle() function increases the quota by one and stores it back into the ownership_quota property on the owner.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.13 Object Movement

During evaluation of a call to the move() function, the server can make calls on the accept and enterfunc verbs defined on the destination of the move and on the exitfunc verb defined on the source. The rules and circumstances are somewhat complicated and are given in detail in the description of the move() function.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2.14 Temporarily Enabling Obsolete Server Features

If the property $server_options.support_numeric_verbname_strings exists and has a true value, then the server supports a obsolete mechanism for less ambiguously referring to specific verbs in various built-in functions. For more details, see the discussion given just following the description of the verbs() function.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.3 Server Configuration

This section discusses the options for compiling and running the server that can affect the database and how the code within it runs.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.3.1 Server Compilation Options

The following option values are specified (via #define) in the file ‘options.h’ in the server sources. Except for those cases where property values on $server_options take precedence, these settings cannot be changed at runtime.

This list is not intended to be exhaustive.

Network Options

NETWORK_PROTOCOL

This specifies the underlying protocol for the server to use for all connections and will be one of the following:

NP_TCP

The server uses TCP/IP protocols.

NP_LOCAL

The server uses local interprocess communication mechanisms (currently either BSD UNIX-domain sockets or SYSV named pipes).

NP_SINGLE

The server accepts only a single “connection” via the standard input and output streams of the server itself. Attempts to have multiple simultaneous listening points (via listen() will likewise fail.

DEFAULT_PORT

(for NP_TCP) the TCP port number on which the server listens when no port-number argument is given on the command line.

DEFAULT_CONNECT_FILE

(for NP_LOCAL) the local filename through which the server will listen for connections when no connect-file-name is given on the command line.

OUTBOUND_NETWORK

The server will include support for open_network_connection() if this constant is defined. If given a zero value, the function will be disabled by default and ‘+O’ will need to be specified on the command line in order to enable it, otherwise (nonzero or blank value) the function is enabled by default and ‘-O’ will needed to disable it.

When disabled or not supported, open_network_connection() raises E_PERM whenever it is called.

The NETWORK_PROTOCOL must be NP_TCP.

MAX_QUEUED_OUTPUT

The maximum number of output characters the server is willing to buffer for any given network connection before discarding old output to make way for new.

MAX_QUEUED_INPUT

The maximum number of input characters the server is willing to buffer from any given network connection before it stops reading from the connection at all.

Other Options

IGNORE_PROP_PROTECTED

Disables protection of builtin properties via $server_options.protect_property when set. See section Protected Properties.

OUT_OF_BAND_PREFIX

Specifies the out-of-band prefix. If this is defined as a non-empty string, then any lines of input from any player that begin with that prefix will not be consumed by reading tasks and will not undergo normal command parsing. See section Out-of-band Processing.

OUT_OF_BAND_QUOTE_PREFIX

Specifies the out-of-band quoting prefix. If this is defined as a non-empty string, then any lines of input from any player that begin with that prefix will have that prefixed stripped and the resulting string will bypass Out-of-Band Processing.

The following are discussed in Controlling the Execution of Tasks.

DEFAULT_MAX_STACK_DEPTH

Default value for $server_options.max_stack_depth.

DEFAULT_FG_TICKS

The number of ticks allotted to foreground tasks. Default value for $server_options.fg_ticks.

DEFAULT_BG_TICKS

The number of ticks allotted to background tasks. Default value for $server_options.bg_ticks.

DEFAULT_FG_SECONDS

The number of seconds allotted to foreground tasks. Default value for $server_options.fg_seconds.

DEFAULT_BG_SECONDS

The number of seconds allotted to background tasks. Default value for $server_options.bg_seconds.

DEFAULT_CONNECT_TIMEOUT

Default value for $server_options.connect_timeout.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.3.2 Running the Server

The server command line has the following general form:

moo initial-arguments db-file-name dump-db-file-name network-arguments

The arguments must occur in this order, e.g., a log file name (-l) must come before db-file-name and dump-db-file-name while any port number must come afterwards.

Initial Arguments

-l log-file-name

(Optional) This specifies a file name for the server log output. If no log file name is specified, log output is directed to stderr.

-e

(Optional) This specifies that, once the database is loaded, Emergency Wizard Mode will be entered before starting any tasks or doing the initial listen to accept connections.

-c script-line

(Optional) This specifies a script line to pass to the $do_start_script verb.

-f script-file

(Optional) This specifies a script file to load and pass (the contents of) to the $do_start_script verb.

For both the -c and -f arguments, the script content is passed in the args built-in variable. The server makes no assumptions about the semantics of the script; the interpretation of the script is the verb’s responsibility. Like Emergency Wizard Mode, the verb is called before starting any tasks or doing the initial listen to accept connections.

The -e argument may not be used with either -c or -f.

Database Arguments

db-file-name

(Required) This should be an existing database file in the appropriate format, whether this be a checkpoint or dump file from a prior run of the server, or one of the many distributed database files in existence (e.g., the ‘Minimal.db’ file provided with the server source distribution).

dump-db-file-name

(Required) This should indicate where to write checkpoint and final dump files. Note that the server does not immediately verify this path, i.e., there is no checking at startup that the file in question is actually writable; in fact, that the directory exists and is writable at the time the dump or checkpoint is attempted is all that really matters.

Network Arguments

The particular set of network arguments available depends on which NETWORK_PROTOCOL the server was compiled with. For a server compiled for single-user mode (NP_SINGLE), there are no additional arguments. For a server compiled for local interprocess communication (NP_LOCAL), there is just

connect-file-name

(Optional) This specifies the pathname for the (UNIX domain) socket or named-pipe that will be used for connecting to the server. If no connect file name is specfied, the compiled-in value of DEFAULT_CONNECT_FILE is used.

For a server compiled for general TCP/IP connections (NP_TCP), we have

-p port-number

(Optional) This specifies an initial port at which to listen for connections once the server successfully starts. If no port number is specfied, the compiled-in value of DEFAULT_PORT is used.

For the sake of backwards compatibility with prior server versions, the -p may be omitted.

-a n.n.n.n

This specifies a local IP address to bind for all listening and all outgoing connection attempts. n.n.n.n must be a valid numeric IP address assigned to one of the local host’s network interfaces. If no specific IP address is specified, any listening (be this the initial listen implicit in server startup or any explicit listening invoked by the listen() function) will bind to all IP addresses on all available network interfaces; likewise outgoing connection attempts will use whatever address is available.

This is how, on a host with multiple network interfaces, one makes the server be visible only on one of them. At present, there is no way to specify that the server should bind to a subset of of the available IP addresses having more than one address but less than the entire set available. However, if the operating system offers port-forwarding and network address translation facilities, one can likely use those to achieve a similar effect.

Note that even on hosts with only a single physical network interface, there will typically be multiple logical ones. One may, for example, specify the loopback address (usually 127.0.0.1), forcing the server to use the loopback interface for all connections, thus guaranteeing that only local connections, whether incoming or outgoing, will be possible (and thus acheiving most of the safety of NP_LOCAL or NP_SINGLE without needing specialized clients).

+O

Explicitly enables open_network_connection() but only if the server has been compiled to include support for this function (i.e., OUTBOUND_NETWORK has been #defined).

-O

Explicitly disables open_network_connection(). Any calls to this function will raise E_PERM even if the server has been compiled to support it.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.3.2.1 Emergency Wizard Mode

This is a mode that allows you to enter commands on standard input to examine objects or evaluate arbitrary code with wizard permissions in order to, e.g., blank out a forgotten wizard password or repair a database having a broken $do_login_command verb that otherwise would not allow anyone to connect.

When you start the server and supply the -e command line option, the database will load and you will then see a prompt indicating the identity of the wizard whose permissions you are using and the current state of the debug flag, e.g., one of

MOO (#2):
MOO (#2)[!d]:

the latter version of the prompt indicating that the debug flag is unset, and thus that errors will be returned rather than raised, as when you unset the d flag on a verb.

The following commands are available in Emergency Mode:

;expression
;;statements

Evaluate expression or statements, print the expression result or the statement return value.

Note that expression or statement can be omitted, in which case you will be prompted for multiple lines of input, as for the .program command. Type a period on a line by itself to finish.

Also note that no background code, whether resulting from fork statements or suspend() calls, will run until after the Emergency Mode is exited.

program object:verb

Set the code of an existing verb.

list object:verb

List the code of an existing verb.

disassemble object:verb

List the internal form of an existing verb.

debug

Toggle the debug flag.

wizard #objectid

Execute future commands as wizard #objectid, which must be an existing player object with ‘.wizard==1’.

continue

Exit the emergency mode, continuing with normal start-up. That is, the server will perform the initial listen and start accepting connections.

quit

Exit the emergency mode, save the database and shut down the server.

abort

Exit the emergency mode, and shut down the server without saving the database. This is useful for if you make a mistake

help

Print the list of commands.

Note that output from wizard mode commands appears on the server’s standard output stream (stdout) and thus can be redirected independently of the log messages if those are being written to the standard error stream (stderr, i.e., if -l has not been specified on the command line).

Also note that unless the server has been compiled to use the NP_SINGLE networking variant, Emergency Wizard Mode is the only use of the server’s standard input and output streams.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

6 Function Index

Jump to:   A   B   C   D   E   F   G   I   K   L   M   N   O   P   Q   R   S   T   U   V  
Index Entry  Section

A
abs 4.4.2.2 Operations on Numbers
acos 4.4.2.2 Operations on Numbers
add_property 4.4.3.3 Operations on Properties
add_verb 4.4.3.4 Operations on Verbs
asin 4.4.2.2 Operations on Numbers
atan 4.4.2.2 Operations on Numbers

B
binary_hash 4.4.2.3 Operations on Strings
binary_hmac 4.4.2.3 Operations on Strings
boot_player 4.4.5 Operations on Network Connections
buffered_output_length 4.4.5 Operations on Network Connections

C
callers 4.4.7 MOO-Code Evaluation and Task Manipulation
caller_perms 4.4.7 MOO-Code Evaluation and Task Manipulation
call_function 4.4.7 MOO-Code Evaluation and Task Manipulation
ceil 4.4.2.2 Operations on Numbers
children 4.4.3.1 Fundamental Operations on Objects
chparent 4.4.3.1 Fundamental Operations on Objects
chparents 4.4.3.1 Fundamental Operations on Objects
clear_property 4.4.3.3 Operations on Properties
connected_players 4.4.5 Operations on Network Connections
connected_seconds 4.4.5 Operations on Network Connections
connection_name 4.4.5 Operations on Network Connections
connection_option 4.4.5 Operations on Network Connections
connection_options 4.4.5 Operations on Network Connections
cos 4.4.2.2 Operations on Numbers
cosh 4.4.2.2 Operations on Numbers
create 4.4.3.1 Fundamental Operations on Objects
create 4.4.3.1 Fundamental Operations on Objects
crypt 4.4.2.3 Operations on Strings
ctime 4.4.6 Operations Involving Times and Dates

D
db_disk_size 4.4.9 Server Statistics and Miscellaneous Information
decode_base64 4.4.2.3 Operations on Strings
decode_binary 4.4.2.3 Operations on Strings
delete_property 4.4.3.3 Operations on Properties
delete_verb 4.4.3.4 Operations on Verbs
disassemble 4.4.3.4 Operations on Verbs
dump_database 4.4.8 Administrative Operations

E
encode_base64 4.4.2.3 Operations on Strings
encode_binary 4.4.2.3 Operations on Strings
equal 4.4.2.1 General Operations Applicable to all Values
eval 4.4.7 MOO-Code Evaluation and Task Manipulation
exec 4.4.4 Operations on The Server Environment
exp 4.4.2.2 Operations on Numbers

F
floatstr 4.4.2.2 Operations on Numbers
floor 4.4.2.2 Operations on Numbers
flush_input 4.4.5 Operations on Network Connections
force_input 4.4.5 Operations on Network Connections
function_info 4.4.7 MOO-Code Evaluation and Task Manipulation

G
generate_json 4.4.2.1 General Operations Applicable to all Values
getenv 4.4.4 Operations on The Server Environment

I
idle_seconds 4.4.5 Operations on Network Connections
index 4.4.2.3 Operations on Strings
is_clear_property 4.4.3.3 Operations on Properties
is_member 4.4.2.4 Operations on Lists
is_player 4.4.3.5 Operations on Player Objects

K
kill_task 4.4.7 MOO-Code Evaluation and Task Manipulation

L
length 4.4.2.3 Operations on Strings
length 4.4.2.4 Operations on Lists
listappend 4.4.2.4 Operations on Lists
listdelete 4.4.2.4 Operations on Lists
listen 4.4.5 Operations on Network Connections
listeners 4.4.5 Operations on Network Connections
listinsert 4.4.2.4 Operations on Lists
listset 4.4.2.4 Operations on Lists
load_server_options 4.4.8 Administrative Operations
log 4.4.2.2 Operations on Numbers
log10 4.4.2.2 Operations on Numbers
log_cache_stats 4.4.9 Server Statistics and Miscellaneous Information

M
mapdelete 4.4.2.5 Operations on Maps
mapkeys 4.4.2.5 Operations on Maps
mapvalues 4.4.2.5 Operations on Maps
match 4.4.2.3 Operations on Strings
max 4.4.2.2 Operations on Numbers
max_object 4.4.3.1 Fundamental Operations on Objects
memory_usage 4.4.9 Server Statistics and Miscellaneous Information
min 4.4.2.2 Operations on Numbers
move 4.4.3.2 Object Movement

N
notify 4.4.5 Operations on Network Connections

O
object_bytes 4.4.3.1 Fundamental Operations on Objects
open_network_connection 4.4.5 Operations on Network Connections
output_delimiters 4.4.5 Operations on Network Connections

P
parent 4.4.3.1 Fundamental Operations on Objects
parents 4.4.3.1 Fundamental Operations on Objects
parse_json 4.4.2.1 General Operations Applicable to all Values
pass 4.4.1 Object-Oriented Programming
players 4.4.3.5 Operations on Player Objects
process_id 4.4.8 Administrative Operations
properties 4.4.3.3 Operations on Properties
property_info 4.4.3.3 Operations on Properties

Q
queued_tasks 4.4.7 MOO-Code Evaluation and Task Manipulation
queue_info 4.4.7 MOO-Code Evaluation and Task Manipulation

R
raise 4.4.7 MOO-Code Evaluation and Task Manipulation
random 4.4.2.2 Operations on Numbers
random_bytes 4.4.2.2 Operations on Numbers
read 4.4.5 Operations on Network Connections
read_http 4.4.5 Operations on Network Connections
recycle 4.4.3.1 Fundamental Operations on Objects
renumber 4.4.8 Administrative Operations
reset_max_object 4.4.8 Administrative Operations
resume 4.4.7 MOO-Code Evaluation and Task Manipulation
rindex 4.4.2.3 Operations on Strings
rmatch 4.4.2.3 Operations on Strings

S
salt 4.4.2.3 Operations on Strings
seconds_left 4.4.7 MOO-Code Evaluation and Task Manipulation
server_log 4.4.8 Administrative Operations
server_version 4.4.9 Server Statistics and Miscellaneous Information
setadd 4.4.2.4 Operations on Lists
setremove 4.4.2.4 Operations on Lists
set_connection_option 4.4.5 Operations on Network Connections
set_player_flag 4.4.3.5 Operations on Player Objects
set_property_info 4.4.3.3 Operations on Properties
set_task_perms 4.4.7 MOO-Code Evaluation and Task Manipulation
set_verb_args 4.4.3.4 Operations on Verbs
set_verb_code 4.4.3.4 Operations on Verbs
set_verb_info 4.4.3.4 Operations on Verbs
shutdown 4.4.8 Administrative Operations
sin 4.4.2.2 Operations on Numbers
sinh 4.4.2.2 Operations on Numbers
sqrt 4.4.2.2 Operations on Numbers
strcmp 4.4.2.3 Operations on Strings
string_hash 4.4.2.3 Operations on Strings
string_hmac 4.4.2.3 Operations on Strings
strsub 4.4.2.3 Operations on Strings
strtr 4.4.2.3 Operations on Strings
substitute 4.4.2.3 Operations on Strings
suspend 4.4.7 MOO-Code Evaluation and Task Manipulation

T
tan 4.4.2.2 Operations on Numbers
tanh 4.4.2.2 Operations on Numbers
task_id 4.4.7 MOO-Code Evaluation and Task Manipulation
task_stack 4.4.7 MOO-Code Evaluation and Task Manipulation
ticks_left 4.4.7 MOO-Code Evaluation and Task Manipulation
time 4.4.6 Operations Involving Times and Dates
tofloat 4.4.2.1 General Operations Applicable to all Values
toint 4.4.2.1 General Operations Applicable to all Values
toliteral 4.4.2.1 General Operations Applicable to all Values
tonum 4.4.2.1 General Operations Applicable to all Values
toobj 4.4.2.1 General Operations Applicable to all Values
tostr 4.4.2.1 General Operations Applicable to all Values
trunc 4.4.2.2 Operations on Numbers
typeof 4.4.2.1 General Operations Applicable to all Values

U
unlisten 4.4.5 Operations on Network Connections

V
valid 4.4.3.1 Fundamental Operations on Objects
value_bytes 4.4.2.1 General Operations Applicable to all Values
value_hash 4.4.2.1 General Operations Applicable to all Values
value_hmac 4.4.2.1 General Operations Applicable to all Values
verbs 4.4.3.4 Operations on Verbs
verb_args 4.4.3.4 Operations on Verbs
verb_cache_stats 4.4.9 Server Statistics and Miscellaneous Information
verb_code 4.4.3.4 Operations on Verbs
verb_info 4.4.3.4 Operations on Verbs

Jump to:   A   B   C   D   E   F   G   I   K   L   M   N   O   P   Q   R   S   T   U   V  

[Top] [Contents] [Index] [ ? ]

Table of Contents


[Top] [Contents] [Index] [ ? ]

About This Document

This document was generated on September 2, 2017 using texi2html 5.0.

The buttons in the navigation panels have the following meaning:

Button Name Go to From 1.2.3 go to
[ << ] FastBack Beginning of this chapter or previous chapter 1
[ < ] Back Previous section in reading order 1.2.2
[ Up ] Up Up section 1.2
[ > ] Forward Next section in reading order 1.2.4
[ >> ] FastForward Next chapter 2
[Top] Top Cover (top) of document  
[Contents] Contents Table of contents  
[Index] Index Index  
[ ? ] About About (help)  

where the Example assumes that the current position is at Subsubsection One-Two-Three of a document of the following structure:


This document was generated on September 2, 2017 using texi2html 5.0.